Shimano Alivio
Author
Discussion

TheBoss1511

Original Poster:

1 posts

62 months

Saturday 20th June 2020
quotequote all
The initial message was deleted from this topic on 20 June 2020 at 21:07

TheBoss1511

Original Poster:

1 posts

62 months

Saturday 20th June 2020
quotequote all
The initial message was deleted from this topic on 20 June 2020 at 21:08

zzrman

670 posts

205 months

Saturday 20th June 2020
quotequote all
I think there are better forums around for questions about bicycle gears.

Vickers_VC10

6,759 posts

221 months

Saturday 20th June 2020
quotequote all
Yes you want pedal powered forum, biker banter is motorbikes.


bearman68

4,878 posts

148 months

Saturday 20th June 2020
quotequote all

shouldbworking

4,786 posts

228 months

Saturday 20th June 2020
quotequote all
Surprisingly you can still get them, considering 7 speed and combination brakes and gears went out with the ark

https://www.ebay.co.uk/itm/Shimano-ST-EF51-GEAR-Sh...

Justin S

3,658 posts

277 months

Saturday 20th June 2020
quotequote all
If it is sticking and not been used for many moons, then they have common issues of the oil in them congealing and causing them to not work at all. You could try, before replacing, some spray oil in it to see if it works again.

Darkslider

3,077 posts

205 months

Saturday 20th June 2020
quotequote all
Buy an individual V brake lever and shifter to replace that combined unit. Should cost about £20 from Chain reaction, still likely to be more than the bike is worth however.

Just so you're aware the shifter and brake lever pictured is a left hand rear brake, and a 3 speed front mech shifter not 7 speed. The 7 speed shifter is the one on the other side with the front brake, that does the rearmost gears.

Piginapoke

5,467 posts

201 months

Sunday 21st June 2020
quotequote all
TheBoss1511 said:
I have deleted my initial message from this topic.
Why is this now a thing on PH?

Barchettaman

6,888 posts

148 months

Sunday 21st June 2020
quotequote all
Piginapoke said:
Why is this now a thing on PH?
Because he posted it in the wrong forum?