Removing link from Shimano HG40 chain
Discussion
I'm sure I've removed links from chains before, but I'm struggling with this one. I can push a pin out with the chain tool but seemingly not far enough to separate the two links - is that what I'm supposed to be doing? If I push the pin through, the side of the link nearest me unhooks, but the other side of both links are still connected to the pin on the far side.
Do I just hit it with a hammer?
And once I've got the link out, do I need a quick-link to join the chain back together again, or can I push an existing pin back through the new end links?
Do I just hit it with a hammer?
And once I've got the link out, do I need a quick-link to join the chain back together again, or can I push an existing pin back through the new end links?
There is a special connecting pin on these isn't there?
Here is a video
https://www.bikeride.com/shimano-hg-ig-chain/
Here is a video
https://www.bikeride.com/shimano-hg-ig-chain/
Gassing Station | Pedal Powered | Top of Page | What's New | My Stuff