weird pattern on fork
Discussion
My new bike arrived today
A Wilier Jareen
Brand new from Chainreaction
there is a weird pattern on fork on the right side
It is a black carbon fork with a very high shine clear coat, looks like it could just been clear coated carbon, but can see no weave, and the lighting at 9pm in the living room at night is not the greatest
smart phone using its flash was the camera
A Wilier Jareen
Brand new from Chainreaction
there is a weird pattern on fork on the right side
It is a black carbon fork with a very high shine clear coat, looks like it could just been clear coated carbon, but can see no weave, and the lighting at 9pm in the living room at night is not the greatest
smart phone using its flash was the camera
Herman Toothrot said:
That’s just the edges of different bits of the lay up, perfectly normal. The smooth continuous finishes you pay extra to get. That’s why car panels etc in raw carbon finish are mega bucks.
The visible edges might be somewhat acceptable, but I wouldn't be too keen on the folded/creased bitAndrewEH1 said:
The visible edges might be somewhat acceptable, but I wouldn't be too keen on the folded/creased bit
Its fine - go look at some unpainted BMC's they are all like this. I still crapped myself like the OP when I bought one not realising though. Or even just google for some picturesThey have replied
"Thanks for your email.
I'm glad you are loving the bike. I have checked with our bike experts and they have advised this is normal, it's a weaved design on the carbon fork, and it forms from the different sheets of carbon that have been glued toegether. e.g the lay and weave of the carbon. Looks pretty cool. You have got a better spec than that which is listed under the description and from the advice the bike experts, you have nothing to worry about.
I hope this answers your question, if you need anything else, please don't hesistate to contact us.
Thanks,"
They have said I can return if I want to as well
"Thanks for your email.
I'm glad you are loving the bike. I have checked with our bike experts and they have advised this is normal, it's a weaved design on the carbon fork, and it forms from the different sheets of carbon that have been glued toegether. e.g the lay and weave of the carbon. Looks pretty cool. You have got a better spec than that which is listed under the description and from the advice the bike experts, you have nothing to worry about.
I hope this answers your question, if you need anything else, please don't hesistate to contact us.
Thanks,"
They have said I can return if I want to as well
Gassing Station | Pedal Powered | Top of Page | What's New | My Stuff