Those with aero bars....

[E65Ross]

Can anyone recommend a lightweight/small front light which has a decent flash setting for use for daytime visibility that would work with an aero handlebar setup? Bike is a Canyon Aeroad.

Cheers

[Dannbodge]

I use the exposure trace on my bikes.

Mine is clipped below my garmin mount so it doesn't take up any space on my bars.
(you can get the adaptors online)

[TheGriffter]

I use a Knog blinder on a set of Vision aero bars and whilst it isn't perfect like on a round basebar, it does work and stay put.
The Canyon's are "very" aero from memory so it may not be suitable but worth a check.

Cheers,

[E65Ross]

Thanks guys. I would rather just something with a rubber band to attach to be honest, it's mainly going to be a light to be seen with a decent flash mode on it, rather than one to be able to see....so just for use in dim/overcast conditions rather than at night. The Knog looks like a good idea.....this is only 80 lumens, whereas the Exposure Trace is 110, is 80 bright enough?

http://www.wiggle.co.uk/knog-light-blinder-mob-kid...

I'm not sure whether this has a suitable connection....but looks the same?

http://www.wiggle.co.uk/knog-light-blinder-road-25...

Cheers

[russy01]

I’ve got a proper exposure Strada that fits under the garmin mount on my Aeroad. Very tidy, leaves the bars completely unobstructed.

[E65Ross]

I ended up ordering an Exposure Switch MK2 with daybright, plus exposure do a silicone band for aero bars which I've got coming as well

I did have a Raceware direct Garmin/Exposure mount which I used very occasionally with my Exposure Race (MK9 I think) but went over a pothole and the mount snapped! I've just gone for a standard official Canyon Garmin mount now, not going to trust the Raceware one again.