Which flat MTB pedals and which backpack?
Which flat MTB pedals and which backpack?
Author
Discussion

ROB_GTR

Original Poster:

1,819 posts

254 months

Friday 5th August 2011
quotequote all
I'm looking for some flat mountain bike pedals without breaking the bank.

I was going to get some Wellgo MG1 Magnesium Platform Sealed pedals in white but see my other thread for the reason i have gone off these.

I like the looks and size of the above pedals, so what else is there on the market that is as good or better for similar money and where from?

I am also on the hunt for a backpack / rucksack for biking, unsure of what a good size would be.....

Need it to be big enough to carry:

Change of clothes
Spare tube/s
Few tools, repair kit & pump
Packed lunch

Also ideally to be hydration compatable / included

A collegue has a 15L bag but it seems pretty small but i have seen other 15L bags that seem bigger?
I have looked at a fair few and this http://www.amazon.co.uk/gp/product/B003AM8AG6/ref=... seems to be a pretty good offer. I have seen this bag in the flesh and it does seem very good too although i feel it may be a little big.

Any help and known offers would be appreciated

MadDad

3,835 posts

290 months

Friday 5th August 2011
quotequote all
Have tried loads of backpacks and am yet to find one that lasts and offers decent value. Evoc and Camelbak are decent but will break the bank!

As for pedals, I am very happy with my DMR V8's on my full-susser - bombproof, it is possible to grease the bearings without taking the pedals apart, they are reasonably light and cost less than £25 - mucho happy with them! Have just fitted a set of NC-17 SUD II's to my hard tail (as they were super cheap on CRC) - don't feel as good as the V8's!

ROB_GTR

Original Poster:

1,819 posts

254 months

Friday 5th August 2011
quotequote all
MadDad said:
Have tried loads of backpacks and am yet to find one that lasts and offers decent value. Evoc and Camelbak are decent but will break the bank!

As for pedals, I am very happy with my DMR V8's on my full-susser - bombproof, it is possible to grease the bearings without taking the pedals apart, they are reasonably light and cost less than £25 - mucho happy with them! Have just fitted a set of NC-17 SUD II's to my hard tail (as they were super cheap on CRC) - don't feel as good as the V8's!
Cheers i will have a gander but since we are on the subject of DMR pedals i do really like these in white with blue text / pins http://www.chainreactioncycles.com/Models.aspx?Mod...

shalmaneser

6,424 posts

224 months

Friday 5th August 2011
quotequote all
The Vaults are very nice, I've just bought some Kona Wah-wahs which are really nice actually, much better than the V8s/v12s I've been using previously. Much bigger platform and much lower profile.

CanadianScot

1,916 posts

195 months

Friday 5th August 2011
quotequote all
Can't really go wrong with Shimano DX's (as long as you put the longer screws in).

Flippin' Kipper

638 posts

208 months

Friday 5th August 2011
quotequote all
Could take a look at the superstar nanos, although the service is supposed to be a bit st I have never had a problem, and I have not heard much bad about the pedals for the price.

ROB_GTR

Original Poster:

1,819 posts

254 months

Saturday 6th August 2011
quotequote all
Just out of interest, whats the difference between the DMR V8 & V12 pedals?

jayfish

6,795 posts

232 months

Saturday 6th August 2011
quotequote all
ROB_GTR said:
Just out of interest, whats the difference between the DMR V8 & V12 pedals?
someone will be along to correct me but iirc the 12's have a larger face but run bearings crank side and bushing outside and are more prone to seizing than the 8's which are bearing/bearing.

Jimbo.

4,215 posts

218 months

Saturday 6th August 2011
quotequote all
V12s run cartridge bearing and bushings (st) BUT have removable pins (good).
V8s run loose bearings and IIRC have a grease port (good) but only 1/2 the pins are removable (st).

Spend a bit more and get some Shimano MX30s: best bearings in the business, and all the pins are removable.

ROB_GTR

Original Poster:

1,819 posts

254 months

Saturday 6th August 2011
quotequote all
Jimbo. said:
V12s run cartridge bearing and bushings (st) BUT have removable pins (good).
V8s run loose bearings and IIRC have a grease port (good) but only 1/2 the pins are removable (st).

Spend a bit more and get some Shimano MX30s: best bearings in the business, and all the pins are removable.
Cheers for that!

I do quite like the Shimano MX30's BUT i want a coloured pedal (Red, white, mixed colour etc) and these only seen to come in silver frown

HereBeMonsters

14,180 posts

211 months

Saturday 6th August 2011
quotequote all
I don't understand why non-removable pins are "st". It means they can never fall out. I've owned one pair of V8s for over 15 years and they are nowhere near to wearing down, if that's the perceived problem.

Jimbo.

4,215 posts

218 months

Saturday 6th August 2011
quotequote all
HereBeMonsters said:
I don't understand why non-removable pins are "st". It means they can never fall out. I've owned one pair of V8s for over 15 years and they are nowhere near to wearing down, if that's the perceived problem.
Wear is not the issue: it's what happens to when when you smack them into things, squashing/snapping the pins. Yes, it's something you should avoid, but it still happens...

Mars

10,089 posts

243 months

Saturday 6th August 2011
quotequote all
I had the original Shimano DX on my 1980s BMX and despite the pounding that had, with the pedal often scraped along a kerb or similar, I never felt it needed new pins - they weren't removable either.

Overrated requirement IMO. I like the DMR V8s but wish all the pins were cast-in/not removable.

HereBeMonsters

14,180 posts

211 months

Saturday 6th August 2011
quotequote all
Jimbo. said:
HereBeMonsters said:
I don't understand why non-removable pins are "st". It means they can never fall out. I've owned one pair of V8s for over 15 years and they are nowhere near to wearing down, if that's the perceived problem.
Wear is not the issue: it's what happens to when when you smack them into things, squashing/snapping the pins. Yes, it's something you should avoid, but it still happens...
If you fk them up THAT badly that you need to replace ALL the pins, they're only about £25-30 for a new pair...

Mars

10,089 posts

243 months

Saturday 6th August 2011
quotequote all
HereBeMonsters said:
If you fk them up THAT badly that you need to replace ALL the pins, they're only about £25-30 for a new pair...
^^^ I'm with him. yes

ROB_GTR

Original Poster:

1,819 posts

254 months

Saturday 6th August 2011
quotequote all
I'm really liking the DMR Vault ones in white with blue pins, just not keen on the price tag!
Anyone know of any offers?

ROB_GTR

Original Poster:

1,819 posts

254 months

Saturday 13th August 2011
quotequote all
Just got the DMR Vaults from CRC £63 in the sale smile

MikeGTi

2,719 posts

230 months

Saturday 13th August 2011
quotequote all
I've run DMR V8s on various bikes BMX to DH to XC and never felt like I needed anything different.

Awesome pedals for the price.

anonymous-user

83 months

Saturday 13th August 2011
quotequote all
Deuter do some good bike pack which include hydration pouches, mine is so old now they don't make it, it has a good webbing system that keeps the actual pack of your back.

Pedals DMR V8 as many have mentioned are cheap enough to be replaceable and good enough not to. I have some of the lighter V8 magnesium ones on my mtb and some white std ones for a bmx project with extra 1/2" axels for a one piece crank if I go with that.

zebedee

4,595 posts

307 months

Sunday 14th August 2011
quotequote all
Pretty sure Wellgo make the DMR pedals, I have Wellgo magnesium ones and they have been fine and untouchable at the price for the weight. Not sure why you don't like them as not sure which other thread you mean.