What color are wires for EBPV and throttle jack

What color are wires for EBPV and throttle jack

Author
Discussion

rjjuge

Original Poster:

101 posts

237 months

Thursday 13th January 2005
quotequote all
May have gotten mine mixed up. The plugs are identical on the solenoids, so what color wires go to which solenoids? I see that one has some red tape on it if that helps... 95 S4.... o2 sensor working, gettin there!

rjjuge

Original Poster:

101 posts

237 months

Thursday 13th January 2005
quotequote all
n/m.... i finally found it in the service manual...

paul c

310 posts

254 months

Thursday 13th January 2005
quotequote all
Start the car from cold?

The EBPV should be left in it's naturally closed position, so it's plug will be dead.

The TJ should be operated to raise revs to compensate,
so it's plug should be live.

I'd assume

jk1

469 posts

259 months

Thursday 13th January 2005
quotequote all
Rob,

That could also be your boost problem if you have the wrong plug on the wastegate solenoid.....

Jim

paul c

310 posts

254 months

Thursday 13th January 2005
quotequote all
Problem is with TJ and EBPV, wastegate has different colours.

Rob, have E-mailed you a photo of mine connected, hope its some use

(assuming the manual did not help)

>> Edited by paul c on Thursday 13th January 20:08