REAR WASHER JET R53 COOPER HELP PLEASE
Discussion
After 3 visits to local BMW main agent they still can't get the part with the jet right . This 53 plate has a cover over the wiper nut . The nut has a hole and a ridge for a pipe to fit over however they keep saying the cover I need has a jet on the outside of the plastic cover not a jet within the plastic cover . Mates cooper s has same nut cover with a slot in it and underneath the slot looks like a piece of short pipe with a washer jet on the end . It sprays through the slot in the cover .
The part they keep coming up with has a jet on the outside ? This does not fit the locating holes on the wiper arm but does fit over the nipple on the nut ?
Any ideas where I can get this correct pipe with jet on the end to go under the nut cover please?
Thanks
The part they keep coming up with has a jet on the outside ? This does not fit the locating holes on the wiper arm but does fit over the nipple on the nut ?
Any ideas where I can get this correct pipe with jet on the end to go under the nut cover please?
Thanks
I believe the pre face-lift and face-lift arrangement - both the make of the unit and the way the washer works - is different. You could just buy a complete used one, specialist breaker or eBay maybe? This one (Valeo) on eBay has the nozzle in the spindle/shaft so takes the arm with the slot in the flip up/down cover.
https://www.ebay.co.uk/itm/01-06-Mini-Cooper-s-one...
https://www.ebay.co.uk/itm/01-06-Mini-Cooper-s-one...
Gassing Station | New MINIs | Top of Page | What's New | My Stuff