2001 Azure engine and wiring compatibility question
Discussion
All, I have a 2001 Azure that caught fire before I bought it. The wiring is pretty much toast as everything else under the hood. I'm thinking that if this car ever sees the road again, it will need everything under the hood from another car.
I'm wondering if the red label Arnage would make a suitable donor for this car. What do the experts say?
I'm wondering if the red label Arnage would make a suitable donor for this car. What do the experts say?
The Azure / Conti have a slightly lower bonnet line that the sedans, so I'd want to make sure that it's not too tall. Also, did they re-route any of the exhaust manifolds, etc.?
I assume all the engine mounts are the same?
Hmm... was the Red Label still the GM slushbox (or at least one with the same bolt-pattern, drive spigot, etc.)? I think they changed transmissions once or even twice during the Arnage run.
Sounds like a fun project though. Keep us posted.
I assume all the engine mounts are the same?
Hmm... was the Red Label still the GM slushbox (or at least one with the same bolt-pattern, drive spigot, etc.)? I think they changed transmissions once or even twice during the Arnage run.
Sounds like a fun project though. Keep us posted.
If you're taking the ECUs and wiring harnesses along with the transmission from the donor car, then the only worry is hooking it up to the dash. (Although that could be a pretty big worry.)
The Arnage is a throttle-by-wire, isn't it? (And I'd bet the Azure is not. So you may need to transplant some other things like the accelerator pedal / rheostat.)
The Arnage is a throttle-by-wire, isn't it? (And I'd bet the Azure is not. So you may need to transplant some other things like the accelerator pedal / rheostat.)
Gassing Station | Bentley & Rolls Royce | Top of Page | What's New | My Stuff