'03 Bentley Arnage Oil Gauge Lamp burned out
Discussion
Hello all,
The lamp in my oil pressure gauge on my 2003 Bentley Arnage T is burned out.
The gauge itself still works fine.
Looking at the maintenance manual, it looks like the dash facia needs to be yanked and the gauge replaced.
Is that the case or is there a workaround to replace the lamp in the gauge?
Thanks!
Paul
The lamp in my oil pressure gauge on my 2003 Bentley Arnage T is burned out.
The gauge itself still works fine.
Looking at the maintenance manual, it looks like the dash facia needs to be yanked and the gauge replaced.
Is that the case or is there a workaround to replace the lamp in the gauge?
Thanks!
Paul
the wood or aluminium dash fascia needs to be removed. a straight forward job.
the oil gauge is a whole unit included in the group of 5 gauges.
the light bulb needs replacing.
i would replace the other bulbs at the same time.
the fascia is removed by;
unscrewing the ventilation pull knobs. the circular ring that is remaining where the pull knobs were then need to be rotated to be unscrewed. the fascia then pulls out. the 5 gauges unit is screwed in and this can be undone.
replace bulbs.
if in doubt let the indie do it. should not take more then a hours labour.
hope this helps
cheers raj
the oil gauge is a whole unit included in the group of 5 gauges.
the light bulb needs replacing.
i would replace the other bulbs at the same time.
the fascia is removed by;
unscrewing the ventilation pull knobs. the circular ring that is remaining where the pull knobs were then need to be rotated to be unscrewed. the fascia then pulls out. the 5 gauges unit is screwed in and this can be undone.
replace bulbs.
if in doubt let the indie do it. should not take more then a hours labour.
hope this helps
cheers raj
Gassing Station | Bentley & Rolls Royce | Top of Page | What's New | My Stuff