1996 Bentley Turbo R - Heated Rear Windscreen
Discussion
Go to the Thermometers Direct website, and buy a digital thermometer with a surface probe. Thermometer 100334 will read up to 750C and the surface probe is part number 101536. Cost will be about 50 quid. You might be able to hire one, or you might have a mate with access to one. After all, you'll only need it once. Search e-bay?
Best wishes,
David.
Best wishes,
David.
Without any direct experience of this, I would
1. Check for voltage at the inputs to the screen (not sure how tricky these would be to get at or how you'd know the screen was on - ref your earlier comments)
2. Measure the resitance of the screen at the terminals. If its open circuit then there's a problem
In both cases a 10quid meter from Maplins would be enough to do the tests
1. Check for voltage at the inputs to the screen (not sure how tricky these would be to get at or how you'd know the screen was on - ref your earlier comments)
2. Measure the resitance of the screen at the terminals. If its open circuit then there's a problem
In both cases a 10quid meter from Maplins would be enough to do the tests
Gassing Station | Bentley & Rolls Royce | Top of Page | What's New | My Stuff