Saxo CV Joint Problem?

Saxo CV Joint Problem?

Author
Discussion

The_Cheeseman

Original Poster:

617 posts

192 months

Friday 4th March 2011
quotequote all
Hey guys,

I've got a shed of a Saxo as a student runabout.

A few days ago I noticed it was making a knocking noise from the passenger front wheel when turning right, a bit of research suggests this is a possible CV Joint issue.

I ordered a new CV joint and didn't drive for a couple of days while I waited for the part (the suppliers emailed today saying they don't have the part).

Anyway, I went for a drive last night and couldn't notice any knocking even in a car park on full lock. Has the fact it's been rested just meant it's settled and the issue is likely still there?

Any advice much appreciated.

Kitchski

6,525 posts

237 months

Saturday 5th March 2011
quotequote all
If it's rumbled or knock then it's dead really. Sometimes they go quiet for a while but always come back.

You need to buy a complete new driveshaft, have a look on ebay. Shouldn't cost more than £50 on an exhange basis, and it coems with both CV joints and boots etc already fitted. Nice and easy, pull the old one out, pop the new one in. CV joints are not usually available as a seperate part.

Just remember to drain the gearbox oil first, otherwise you'll end up with a messy driveway biglaugh