Peugeot 307 heater harness

[UK345]

Hi i have a 2005 Peugeot 307 1.6 S and the other day the heater stopped working at all speeds. When i removed the old heater harness i noticed the plastic bits were all melted away. What and why would this of happened ?

[windsor defender]

I have just bought a 206 (W plate) and is showing a "Error 7" on the stereo. Any ideas on a fix for this?

First post on the site and still finding way round.

[Atex31]

Hi, I have replaced loads of Peugeot 307 heater wiring looms especially at this time of year, the pins on the resistor multi-plug heat up and spread, this can happen through normal use (French designed) or can be made worse by a stiff blower motor or a blocked pollen filter.

A replacement Peugeot 307 heater wiring harness is available separately from Peugeot make sure you replace the speed resistor and pollen filter at the same time.

You should also check the blower motor isn't partially seized.

If you want any more information just ask, hope that helps you.

Regards

Atex31

http://www.autotechnix.co.uk/Car-electrics--Southa...