Laguna Radio code

Author
Discussion

MikeDH

Original Poster:

2,277 posts

222 months

Tuesday 20th April 2010
quotequote all
Suffered a flat battery on the work Laguna (03 reg) the other day. Since then it's been asking for a radio code. It is with the documents, but once I've put the numbers in I don't know how to confirm it - anything I try just makes a "beep" noise, or comes up with "Error", and you can't do anything for a while, til you get another go to enter the code.

Any ideas? Cheers!

GTP rpm

4,506 posts

202 months

Tuesday 20th April 2010
quotequote all
Enter the code via the steering wheel controls.

Use the roller rotate through each digit until it is correct...pressing the button on the botton of the control, to go to the next digit. Once the 4th digit is entered, hold down the bottom button until the radio comes on, or the Error message appears again.

Are you sure the code is correct?

If it's had a replacement radio, it's possible that the code you have isn't for that unit.

HTH

MikeDH

Original Poster:

2,277 posts

222 months

Tuesday 20th April 2010
quotequote all
Cheers, I'll give that a go and see what happens. I think I've tried that already, so can only assume the code is wrong. It's the original radio as far as I can tell.

GTP rpm

4,506 posts

202 months

Wednesday 21st April 2010
quotequote all
The code is usually on the inside of the front cover in the service book.

MikeDH

Original Poster:

2,277 posts

222 months

Wednesday 21st April 2010
quotequote all
That would be worth a look! The one I tried was scrawled on something. I'll try it tomorrow, I'm taking it to have its windscreen replaced...