Peugeot 306 front valance/spoiler

Peugeot 306 front valance/spoiler

Author
Discussion

skyedriver

Original Poster:

18,766 posts

289 months

Sunday 12th November 2006
quotequote all
Busy with wifes car at the moment and have got round to the cracked front valance.
It's a 2000 (W) HDi and the plastic has cracked fron the bottom edge up and then longitudinally cross the front of the car (about 150 - 200mm).
Tried to repair ir previously, from behind, with resin/matting etc but it doesn't readily stick to the plastic. Everything else but not the plastic.
Been thinking that a small lip spoiler would reinforce the area, I don't want anything OTT just something inconspicuous. Any suggestions.
Regards
Tony H

ASBO

26,140 posts

221 months

Wednesday 15th November 2006
quotequote all
Well tony,

you'll be pleased to hear that the lip spoiler from the GTI6 will fit straight on. The HDI and the '6 look identical bar this little black strip that attaches to the bottom of the bumper. that should provide some rigidity and also sharpen up the front of the car into the bargain.

dont know part no. im afraid, but Pug will be able to sort you out. then you may well be able to find one off a scrapy or alternatively, you could try here and do a search in the for sale section

good luck fella.

Mr Whippy

29,761 posts

248 months

Wednesday 15th November 2006
quotequote all
£22 from Peugeot new, with screws and clips and everything.

Not sure on the part number right now, but if your stuck I can get it off the receipt.

Cheers

Dave

skyedriver

Original Poster:

18,766 posts

289 months

Wednesday 15th November 2006
quotequote all
Brilliant, thanks. Will look out for a one on the road, or a pic of one, and then pop off to the local dealer, (100 miles away in Inverness)

skyedriver

Original Poster:

18,766 posts

289 months

Monday 4th December 2006
quotequote all
Hi asbo, been talking to the pug dealer, they list 2 different spoilers and tell me all 306's had a little lip spoiler, ours certainly doesn't so wonder about his info. Can you confirm the S16 front and the HDi front are otherwise similar or is that more of a "looks similar"?
ps been trying to register for the pug306 web site but whilst I am now registered I cannot read any forums or sales or whatever.
Tony H

Mr Whippy

29,761 posts

248 months

Monday 4th December 2006
quotequote all
The S16 is a different bumper to the phase 2 and 3 spoilers.

I'm pretty sure all Hdi's are phase 3's, and so they had the round foglight bumpers, and specifically the same chin strap spoilers as the Gti6... however, the only cars to have them fit originally were the phase 2 Gti6 and Rallye's, who's side skirts were painted black on their lower halves, and the chin spoiler carried on the black band theme.

None of my phase 3's or any of owners have ever had it fitted OEM, many seem to think it was in a wrapper in the boot upon delivery, and many dealers just didn't fit them...


Anyway, I digress.

Spoiler clearly visible on this one...


I'll get the part number tomorrow evening and post it up.

Dave

Edited by Mr Whippy on Monday 4th December 23:44

ol' dirty

9,074 posts

222 months

Tuesday 5th December 2006
quotequote all
I got the holes but no chin spoiler! looks quite good though

skyedriver

Original Poster:

18,766 posts

289 months

Tuesday 5th December 2006
quotequote all
That looks similar, her HDi has the round fogs, (where are they on that photo? wife smashed one with a stone thrown up from another vahicle and been looking for a protective cover for the replacement ever since).
Her bumper has the holes too, was beginning to think it might have dropped off.

thanks very much for all help/advice

skyedriver

Original Poster:

18,766 posts

289 months

Sunday 17th December 2006
quotequote all
Thanks everyone, job's a good'un
GTi - 6 /rallye spoiler fits perfectly, if a bit tricky getting the screws to turn in the plastic whilst underneath the car which is dripping wet!

Mr Whippy

29,761 posts

248 months

Monday 18th December 2006
quotequote all
skyedriver said:
Thanks everyone, job's a good'un
GTi - 6 /rallye spoiler fits perfectly, if a bit tricky getting the screws to turn in the plastic whilst underneath the car which is dripping wet!


Small drill bit and pre-tap the holes, OR, screw the screw's so they self-tap but off the car, then doing it on the car is lots easier.

Glad it's sorted then, that should reinforce the bendy front bumper

Dave

skyedriver

Original Poster:

18,766 posts

289 months

Tuesday 19th December 2006
quotequote all
Mr Whippy said:
OR, screw the screw's so they self-tap but off the car, then doing it on the car is lots easier.

Dave


Did that on the second half

the wounds will heal soon!

JG`

8 posts

238 months

Tuesday 19th December 2006
quotequote all
Part number is PT7414LO for Phase3 306's if anyone needs it