Omex 600 + Launch Control on a 172

[Dan x2c]

Currently have a 172 Cup which has a full decatted exhaust, piperX Viper i/k and R-sport ecu, over the coming year i also want to add a 182 4-2-1 manifold and get some inlet manifold work, obviously the car will need to lose the r-sport from then on in and get a proper map to make full use of the mods.

What i want to know is whether people think it would be beneficial to get the stand-alone engine managment as this could be remapped further if i add further things?

Also does the Omex have the option of launch control? As if got this i'd prob whack it on for good measure anyway!

Is there any other engine management systems i could consider around the same price?

Cheers in advance

[Nick_r182]

Dont know about launch control, but omex 600 can be mapped and then re-mapped if more mods are done. Other options could be SMT-6 or dastek uni chip. Omex seem to be really good, but people have had mixed views on the smt-6.
For inlets check out www.angel-works.co.uk/ Ben comes very highly recomended on cliosport.

[Mikey G]

Emerald and DTA will come in similair but not sure if they have the launch control option.
With the mods you are looking at i dont think it is much point in going for a stand alone system unless you are going for throttle bodies. A custom map should be ok for what you are doing.

[Dan x2c]

ok cheers for that guys........AWT would be where i'd be looking for inlet work anyway fella!