Finding a locking wheel nut tool.

Finding a locking wheel nut tool.

Author
Discussion

groomi

Original Poster:

9,323 posts

250 months

Sunday 9th July 2006
quotequote all
Hi All,
I'm trying to remove the wheels on my Pug to get tehm refurbished but they have locking wheel nuts adn I don't seem to have a tool for them. Now, hopefully I'm being really stupid adn one of you will come on here and tell me it is located in XYZ position on the car...






Pleeeeeaase?

up-the-dubs

4,282 posts

236 months

Monday 10th July 2006
quotequote all
If it's not in the toolkit/wheel well/glovebox/door bins/boot liners/footwell/ashtray/centre console/seat back pockets or under the seats, it's in the previous owners house or at the dealers.



At least that's how we find them in customers cars . Or ask the owner .

sorrento205

2,875 posts

243 months

Monday 10th July 2006
quotequote all
if you cant find it, its not the end of the world. Trye changing garages "should" hopefully have tools to deal with it. In my case it was a socket with a spiral thread inside which cut into the wheelnut as you unscrewed it.

up-the-dubs

4,282 posts

236 months

Monday 10th July 2006
quotequote all
sorrento205 said:
if you cant find it, its not the end of the world. Trye changing garages "should" hopefully have tools to deal with it. In my case it was a socket with a spiral thread inside which cut into the wheelnut as you unscrewed it.


See my occupation .

We stay clear of them as often as possible. Don't have any tools to do the job and end up hammering on a slightly smaller socket and using that. Buggers up the socket and bolt though.

groomi

Original Poster:

9,323 posts

250 months

Monday 10th July 2006
quotequote all
up-the-dubs said:
sorrento205 said:
if you cant find it, its not the end of the world. Trye changing garages "should" hopefully have tools to deal with it. In my case it was a socket with a spiral thread inside which cut into the wheelnut as you unscrewed it.


See my occupation .

We stay clear of them as often as possible. Don't have any tools to do the job and end up hammering on a slightly smaller socket and using that. Buggers up the socket and bolt though.


All good ideas, but I need to do the tyres before I can get an MOT - so can't get to a garage.

Hey ho, looks like a bodge it solution will have to be found...

combemarshal

2,030 posts

233 months

Tuesday 11th July 2006
quotequote all
Go for the smaller socket and a big hammer, or you could try one of those 'One size fits all' sockets that they have on the shopping channels, the ones with lots of sliding splines