RenaultCOM or Can-Clip

[Kenny6868]

Does anyone have any experience of using RenaultCOM or Can-Clip to diagnose and clear fault codes on a 2014 Renault Megane?
Which is best? Easy of use? Any input would be appreciated.

[Gilhooligan]

Also interested to hear this. I actually have a can clip hardware but never used it (came with car). Do you have to download and pay for the software?

OP I’ve cleared errors off my Megane (2010) with one of those cheap obd11 WiFi adapter things and a free phone app (car scanner). They aren’t the best for diagnosing though as wont display all the codes.

[Kenny6868]

You can buy the Can-Clip software off eBay for £5ish. It's the hardware that costs. RenaultCOM is a lot cheaper, so I might give it a go. I can get it for approx £40 so its not going to break the bank.

[James-jupp]

Gilhooligan said:

Also interested to hear this. I actually have a can clip hardware but never used it (came with car). Do you have to download and pay for the software?

OP I’ve cleared errors off my Megane (2010) with one of those cheap obd11 WiFi adapter things and a free phone app (car scanner). They aren’t the best for diagnosing though as wont display all the codes.

Where as i have a elm327 and need a can clip.. Hahah they are still really expensive but nothing else works on my early megane!!

[James-jupp]

Kenny6868 said:

Does anyone have any experience of using RenaultCOM or Can-Clip to diagnose and clear fault codes on a 2014 Renault Megane?
Which is best? Easy of use? Any input would be appreciated.

if you really want a reader, alot of the other ones will work with the later megane - but you know it can even be done nearly free if you get an 80p elm327 from ali express and download "torque" from the google play store.