Clio 182 - Window not working...
Discussion
Right... situation is, no movement on the passenger side window. I've replaced the regulator but it didn't work. Fearing it was faulty, I now have another one. Same issue.
I followed a thread on ClioSport about other issues including the UCH, of which I've done some testing and tbh it's not leading to it being that.
Today I applied my very limited knowledge of electronics to the issue. This is what I found... continuity between the switch and the socket for the regulator is perfect. I test for voltage coming from the socket and get 12v on both when idle, and one jumps to 0v when the window is told to move up, and the other ones jumps to 0v when the window is told to move down. Is that what's meant to happen? Or should be it the other way round?
If it is... the way I see it, the regulator is fine, the wiring is fine, the power supply is fine, but put it all together and it doesn't work. Driving me crazy!
I followed a thread on ClioSport about other issues including the UCH, of which I've done some testing and tbh it's not leading to it being that.
Today I applied my very limited knowledge of electronics to the issue. This is what I found... continuity between the switch and the socket for the regulator is perfect. I test for voltage coming from the socket and get 12v on both when idle, and one jumps to 0v when the window is told to move up, and the other ones jumps to 0v when the window is told to move down. Is that what's meant to happen? Or should be it the other way round?
If it is... the way I see it, the regulator is fine, the wiring is fine, the power supply is fine, but put it all together and it doesn't work. Driving me crazy!
Gassing Station | French Bred | Top of Page | What's New | My Stuff