Peugeot 206cc - Fan resistor
Discussion
Hi Folks,
My Sister has a 206cc, the fan only works on the full speed setting. I figured out that this means the resistor is not working. I will be replacing the pollen filter and the resistor at the same time. Question is, although I have located the resistor and managed to unclip it, it is still attached with the wires and i can't seem to release it. Is there a guide or a video anywhere that might be of help?
Nick
My Sister has a 206cc, the fan only works on the full speed setting. I figured out that this means the resistor is not working. I will be replacing the pollen filter and the resistor at the same time. Question is, although I have located the resistor and managed to unclip it, it is still attached with the wires and i can't seem to release it. Is there a guide or a video anywhere that might be of help?
Nick
Assuming it's the same as a 406, I've just done mine. It will have 2 green conectors. They are a bit tight and have a sprung bit of a plastic clip which stops them coming out. I found it easier to unclip the wiring from under the dash and get the whole thing in the footwell for easy access. Took about 1/2 an hour all in.
Hope this helps
Hope this helps
Gassing Station | French Bred | Top of Page | What's New | My Stuff