Citreon Berlingo
Discussion
quick question, my horn keeps going off every so often only a single beep, this morning went off for about 30 seconds until i could get key in the ignition and engine started.
Now the remote central locking keeps playing up,
now my work van was valeted yesterday.
is there just a tempo damp connection
is the battery going in the fob, any help guys
Now the remote central locking keeps playing up,
now my work van was valeted yesterday.
is there just a tempo damp connection
is the battery going in the fob, any help guys
Hi will put money on it being the BSi (body controller) sometimes the seals on the bulkhead will let water in and that will corode the Bsi, sometimes they go mad after a flat battery or battery change and sometimes they just go mad all on their own!
I would try a Bsi reset before you do anything which can be done as follows!
Put the driver's window down, lift the bonnet and ensure all equipment is switched off.
Ensure all doors are closed and remove key from the ignition.
Wait for 3 minutes, disconnect the vehicle battery and wait 15 seconds.
Reconnect the vehicle battery, wait a further 10 seconds (do not open doors.).
Switch on the side lights through the driver's window.
Switch on the ignition and check system's functionality.
Hold lock button on key down for 10 seconds.
Remove key open & close door test central locking system.
Start the engine and complete the system's check.
Failure to follow this procedure could result in incorrect operation of many BSI related items.
Good luck and please let us know if this helped!
I would try a Bsi reset before you do anything which can be done as follows!
Put the driver's window down, lift the bonnet and ensure all equipment is switched off.
Ensure all doors are closed and remove key from the ignition.
Wait for 3 minutes, disconnect the vehicle battery and wait 15 seconds.
Reconnect the vehicle battery, wait a further 10 seconds (do not open doors.).
Switch on the side lights through the driver's window.
Switch on the ignition and check system's functionality.
Hold lock button on key down for 10 seconds.
Remove key open & close door test central locking system.
Start the engine and complete the system's check.
Failure to follow this procedure could result in incorrect operation of many BSI related items.
Good luck and please let us know if this helped!
Gassing Station | French Bred | Top of Page | What's New | My Stuff