Pocher 1/8 models

[slotucram]

Hi all,

Has anyone built a Pocher model kit? Thinking of purchasing the 1/8 scale Aventador model but looks like it could be quite difficult....

[GiantEnemyCrab]

This guy has

https://www.pistonheads.com/gassing/topic.asp?h=0&...

[MBBlat]

GiantEnemyCrab said:

This guy has

https://www.pistonheads.com/gassing/topic.asp?h=0&...

My earlier, and not so detailed, Aventador build
https://www.pistonheads.com/gassing/topic.asp?h=0&...

My best tip, spend an extra $35 fit PJ Koo’s supplementary instructions, order as a download and he will send it to your Dropbox so no international shipping or tax. https://www.ebay.com/itm/321412925246?itmmeta=01HW...

Tools, get a decent ph 0 and ph 00 screwdriver, I use Wera available from Amazon. A set of taps is also useful, you will need 1.8, 2.3 and 2.6mm taps, the instructions above will tell you where and when to use them. A set of sanding sticks, Tamiya extra thin cement and superglue will also come in handy.

You don’t need to paint it or add extra detail, but it will look so much better if you do.