What are we doing with these XRAY NT18 nitro engines?
Discussion
Nigel forced us all to buy these in the "frivolous" thread...
https://www.t2shop.de/epages/61746328.mobile/en_GB...
So what plans do people have?
Presumably too small to power anything of reasonable size...
I am guessing mine may be destined for a 1/12th pan car but it will need a lot of custom parts! Might just go single piece chassis and rear pod for 'ease'. Might have to spark up some CAD.
However, if I use a standard 1/12 solid rear axle, I guess I'm mostly tied to 48/64dp gears... what pitch pinion does the NT18 clutch come with?
Could probably Google but since so many folks seem to have bought them, thought it would be nice to get a discussion and maybe project progress thread going!
https://www.t2shop.de/epages/61746328.mobile/en_GB...
So what plans do people have?
Presumably too small to power anything of reasonable size...
I am guessing mine may be destined for a 1/12th pan car but it will need a lot of custom parts! Might just go single piece chassis and rear pod for 'ease'. Might have to spark up some CAD.
However, if I use a standard 1/12 solid rear axle, I guess I'm mostly tied to 48/64dp gears... what pitch pinion does the NT18 clutch come with?
Could probably Google but since so many folks seem to have bought them, thought it would be nice to get a discussion and maybe project progress thread going!
shirt said:
When I link the page comes up in Arabic, but I’d prob try and chuck it into something like this
You could probably make something super basic yourself out of vac formed thin polycarbonate
Great idea to put it in a boat.You could probably make something super basic yourself out of vac formed thin polycarbonate
I suppose the only issue would be with cooling, but you could make a water cooled jacket out of 5MM curled copper tube i geuss.
And i know this is intended for a brushless electric motor, but this might be good enough to slip over the cooling fins.
https://www.banggood.com/Surpass-Hobby-36-S-Alumin...
Then perhaps use heat resistant epoxy glue to bond it to the head and transfer the heat from the engine to the jacket.
https://www.banggood.com/Surpass-Hobby-36-S-Alumin...
Then perhaps use heat resistant epoxy glue to bond it to the head and transfer the heat from the engine to the jacket.
I think these engines look great. But in addition to needing a glowplug starter (~£10) how are folks considering starting these engines?
You need to spin the crank. If it's installed in an RC model car you can get a starter box that spins the wheels. But they are really expensive (like ~£100) and don't work for a freestanding engine or model boat.
All ideas welcomed - so I can get ordering!
You need to spin the crank. If it's installed in an RC model car you can get a starter box that spins the wheels. But they are really expensive (like ~£100) and don't work for a freestanding engine or model boat.
All ideas welcomed - so I can get ordering!
AnotherGuy said:
I think these engines look great. But in addition to needing a glowplug starter (~£10) how are folks considering starting these engines?
You need to spin the crank. If it's installed in an RC model car you can get a starter box that spins the wheels. But they are really expensive (like ~£100) and don't work for a freestanding engine or model boat.
All ideas welcomed - so I can get ordering!
I have a plan for mine, more of that when the other item arrives.You need to spin the crank. If it's installed in an RC model car you can get a starter box that spins the wheels. But they are really expensive (like ~£100) and don't work for a freestanding engine or model boat.
All ideas welcomed - so I can get ordering!
I’m also quite lucky in that I already have a starter box that I use for my 1/8 and 1/10 Nitro cars, and of course all the other starting gear and fuel etc.
But this should do as a starter.
https://www.modelsport.co.uk/index.php?product_id=...
I have decided what I'm going to do with my little engine, I'm going to make a nitro powered desk fan. It'll be noisy, smelly and incredibly dangerous so WIN. I have some lovely oak that i'll make a mount.
I remembered I have a very old Schumacher Nitro car circa 90's. Dragged it out and it's not in a good way. So'll pinch the tank from that. Have a muffler on order for 17 quid.. that's double what I paid for the engine.
I need some help please. I need a pull start and a prop I can mount to the output axle. I would welcome guidance on a glow plug battery pack and fuel please.
Will update this thread if anyone is interested
I remembered I have a very old Schumacher Nitro car circa 90's. Dragged it out and it's not in a good way. So'll pinch the tank from that. Have a muffler on order for 17 quid.. that's double what I paid for the engine.
I need some help please. I need a pull start and a prop I can mount to the output axle. I would welcome guidance on a glow plug battery pack and fuel please.
Will update this thread if anyone is interested
shirt said:
When I say prop, something like the one in the vid shirt postedOh and an airfilter that fits this little engine please.
Edited by Origin Unknown on Thursday 30th April 22:07
Origin Unknown said:
I have decided what I'm going to do with my little engine, I'm going to make a nitro powered desk fan. It'll be noisy, smelly and incredibly dangerous so WIN. I have some lovely oak that i'll make a mount.
I remembered I have a very old Schumacher Nitro car circa 90's. Dragged it out and it's not in a good way. So'll pinch the tank from that. Have a muffler on order for 17 quid.. that's double what I paid for the engine.
I need some help please. I need a pull start and a prop I can mount to the output axle. I would welcome guidance on a glow plug battery pack and fuel please.
Will update this thread if anyone is interested
I was going to say I don’t think you will get a pull starter for and .18 size engine, but once again I would be wrong in my assumptions’I remembered I have a very old Schumacher Nitro car circa 90's. Dragged it out and it's not in a good way. So'll pinch the tank from that. Have a muffler on order for 17 quid.. that's double what I paid for the engine.
I need some help please. I need a pull start and a prop I can mount to the output axle. I would welcome guidance on a glow plug battery pack and fuel please.
Will update this thread if anyone is interested
Seems you can get an .18 engine from wish with a pull starter!
?? Look what I found on Wish for a great price!
https://www.wish.com/share/1860lezmme
I know it’s £49 for the whole engine but some diging might find the pull starter on its own!
Good luck!
Edited by nigelpugh7 on Friday 1st May 08:09
shirt said:
Was anyone else horrified that he stuck the engine servo on with hot glue and tie wraps.I was literally wincing !!
Gassing Station | Scale Models | Top of Page | What's New | My Stuff