2.4 S80 advise please.....

2.4 S80 advise please.....

Author
Discussion

Vulgar LS2

Original Poster:

1,785 posts

189 months

Monday 4th July 2011
quotequote all
The FIL has had his 52 plate 2.4 S80 for around 6 months (67k miles). recently it has started to stall when comming off of the power to turn a corner or stop when not fully warmed up. Im thinking this is going to be throttle body related, any other sugestions would be great.

Andy

chunkol

7,703 posts

234 months

Tuesday 5th July 2011
quotequote all
Could well be, but my 51 V70 did the same when I had an ABS sensor fault on the front wheels. Cured by fixing the ABS problem (new rings and one new sensor)

Skellen

1,099 posts

264 months

Wednesday 6th July 2011
quotequote all
Alas, that sounds like ETM or possibly MAF - has it thrown up the EML light?

Need to get the codes read, but, assuming all other service items are up to scratch, it is likely to be, ETM, MAF or possibly and 02 sensor.


Vulgar LS2

Original Poster:

1,785 posts

189 months

Wednesday 6th July 2011
quotequote all
Skellen said:
Alas, that sounds like ETM or possibly MAF - has it thrown up the EML light?

Need to get the codes read, but, assuming all other service items are up to scratch, it is likely to be, ETM, MAF or possibly and 02 sensor.
As far as I know, there have been no warning lights. he does have an OBDII reader, will this read the codes?

Andy

Vulgar LS2

Original Poster:

1,785 posts

189 months

Wednesday 6th July 2011
quotequote all
chunkol said:
Could well be, but my 51 V70 did the same when I had an ABS sensor fault on the front wheels. Cured by fixing the ABS problem (new rings and one new sensor)
Why did it do that, do you know?

chunkol

7,703 posts

234 months

Monday 11th July 2011
quotequote all
Vulgar LS2 said:
chunkol said:
Could well be, but my 51 V70 did the same when I had an ABS sensor fault on the front wheels. Cured by fixing the ABS problem (new rings and one new sensor)
Why did it do that, do you know?
It did it when it lost the speedo due to the abs sensor not working. Started throwing up engine check light as well as abs lights and brake warning light. I can only assume the throttle needed a speed input to keep the throttle open a bit, or at least let fuel flow under certain conditions.

Found my thread - This one, a few replies down

Edited by chunkol on Monday 11th July 03:01