Tuscan convertible LHD conversion surge

[kurtsti]

I'm in the process of converting a tuscan convertible in a LHD version I have all the tooling to make it LHD
The staring point is body shell 1021 one of the 13 shell that were not finest when the factory close
I've got about 90% of the dedicate parts for the convertible
I'm looking for the following parts and even when you have the parts and do not wish to sell these please let my know so I can get these copied or just some times the dimensions or al what I need
Covers L and R for the rear lights see photo
Roll hope covers l and r inside the car see photo
Roll hoops support bars see photo
dekklit cube box between the roll hoops see photo
RH windscreen piller see photo
linkage between the soft top hoop and the body pivot point 2 bolts in the soft tot hoop en 1 in the body
Any help will be welkome






Cheers

kurt

[kurtsti]

extra photo's

[kurtsti]

[kurtsti]

[Speed 3]

If those bits are not available at TVR Parts I doubt very much whether anyone else has got any. Your best bet would be to befriend a convertible owner and get them copied with 3-D printing then sprayed in appropriate colours. I think this is going to be the way forward for out of production parts on all cars.

[RetroWheels]

https://www.trackvroad.co.uk/projects/build-of-new...


Give Track V Road a call - they have experience in the building of unfinished Tuscan's ,so may be able to help.

[Speed 3]

kurtsti said:

Rubber bung cover is probably this one:

http://www.racetechdirect.co.uk/car-parts/body-tri...