ThinkNavi Cradle/GPS for SPV M2000

[Ali_Kat]

Hiya

Hope someone here can help me please.....

I have TomTom Navigator installed on an Orange SPV M2000, and am trying to get it to connect to the GPS within the ThinkNavi Cradle www.pocketgpsworld.com/thinknavi-gps-mount.php.

However, having sat there for hours, trying every available baud rate under 'Other Cable NMEA GPS' on every COM Port shown (COM9, Serial Cable on COM1, COM2), it STILL tells me there is no GPS device found.

Any suggestions please?

Many thanks in anticipation

[Ali_Kat]

Fix found

For future users........

You need to go into settings, Beam Connections and turn them off.

It then recognises Serial Cable on COM1 at 4800 Baud rate (not 9600 as per the manual!!)

[paulhol]

i have tom tom 5.21, the spv m2000 tom tom cradle plugged into a road angel 2 and i have tried literally every combination of settings and im about to send the damn thing back and just use a map

>> Edited by paulhol on Wednesday 21st December 00:50