Were to cut in to wire for rear speaker help please

[den9112]

Hi, i am in the process of fitting a new HU in my non bose 2011 a3 cabriolet (from Chorus) i have replaced the front speakers with some Focal components and all is running fine ..The A pillar on the cab is pretty easy to remove for the tweeters but replacing takes a lot longer ,anyway i have now moved on to the rear were i am fitting some Herts 5.25inch and i have managed to run both pairs of speaker wires to the HU (no connection yet) ...now before i rush in a splice the wires to pick up the rear connections ,green and purple i am not sure were to join them as i notice the Connects2 block as the rear wires connected and that plugs in to the pioneer block then in to the HU ,do i pick up from pioneer in to HU or further down on the connects2 block..My car as only ever had two front speakers and never had a rear amp ..Any help before i go cutting away would be appreciated..Thanks

[defblade]

I'd cut into the connects 2 block - I like to keep the HU's OE wiring intact if at all possible, so it's easier to move it to another car in the future, at which point you'll probably get a new, car specific, connects 2 lead to play with.

[den9112]

That makes sense,thanks