Head unit adapters for ATOTO A6 (Nissan)
Discussion
Hi I was hoping someone might be able to enlighten me on what adapters I'll need to fit the ATOTO A6 into my Nissan NV200 2011. I believe the connectors are the same design as other Nissan motors of the period (Qashqai, Note, etc)
I have pulled out my current head unit
https://us.v-cdn.net/6031891/uploads/editor/mu/nbn...
I can't seem to find much guidance from ATOTO themselves. Happy to consider other brands as well.
I have pulled out my current head unit
https://us.v-cdn.net/6031891/uploads/editor/mu/nbn...
I can't seem to find much guidance from ATOTO themselves. Happy to consider other brands as well.
https://incartec.co.uk/Nissan/NV200-Combi/Stereo-U...
Should give you a good starting point.
Edit: If you want to keep steering wheel controls, you'll need a patch lead too. I'd assume Atoto use the same method as all the other Chinese HU manufacturers and just have two signal wires to connect, then you'll have to go into learning mode on the HU and teach it what button you want to do what.
https://incartec.co.uk/part-search?s=49-0
Should give you a good starting point.
Edit: If you want to keep steering wheel controls, you'll need a patch lead too. I'd assume Atoto use the same method as all the other Chinese HU manufacturers and just have two signal wires to connect, then you'll have to go into learning mode on the HU and teach it what button you want to do what.
https://incartec.co.uk/part-search?s=49-0
Edited by oilslick on Monday 31st August 20:21
Gassing Station | In-Car Electronics | Top of Page | What's New | My Stuff