Fuel Hose advise/help
Discussion
I have a slight fuel leak See red CIRCLE below where the leak is(very slight)and I want to replace the fuel hose with something more substantial, The current hose on my Cerbera is a 7 x 13 see SQUARE picture below. I have found a Sytec hose online (braided) but it is an 8mm bore would this be ok to use once it is clamped at both ends???
I don't have any experience with this sort of thing so please advise me guys!!
Link to Sytec hose http://www.demon-tweeks.co.uk/Performance/Fuel_Sys...
I don't have any experience with this sort of thing so please advise me guys!!
Link to Sytec hose http://www.demon-tweeks.co.uk/Performance/Fuel_Sys...
I've used these guys a number of times in the past, maybe they can assist:
http://www.spectrum-hose.co.uk/
http://www.spectrum-hose.co.uk/
Update.
Fixed the leaking hose, I replaced it with a stainless braided hose it was an easy job even for a novice like me, I have also had the radiator re-cored and fitted new silicon water hoses and a stainless water pipe. I have also just painted the Speed Six spark plug cover (black)and I think I will remove the Cam Cover and get it painted or powder coated red to brighten up the engine bay.
George
Fixed the leaking hose, I replaced it with a stainless braided hose it was an easy job even for a novice like me, I have also had the radiator re-cored and fitted new silicon water hoses and a stainless water pipe. I have also just painted the Speed Six spark plug cover (black)and I think I will remove the Cam Cover and get it painted or powder coated red to brighten up the engine bay.
George
Gassing Station | Speed Six Engine | Top of Page | What's New | My Stuff