refilling the oil of the speedsix

refilling the oil of the speedsix

Author
Discussion

tvr2367t

Original Poster:

9 posts

192 months

Sunday 25th April 2010
quotequote all
Hi,
today I began to change the oil of my T350C.
After removing the plug at the end of the sump
I thought about getting the fresh oil back into the sump
that the scavenge pump does not run dry when I start the engine.
So what is the easiest way and how much oil I have to fill up into the sump?
Could someone advise me in refilling the engine?
Cheers
Siggi

Peppe

376 posts

227 months

Wednesday 28th April 2010
quotequote all
Hi !

There should be two oil plugs in the system, one on the oiltank and one the engine sump (just below the power steering pump) To drain the system you need to open both plugs.

It should be approx 9 liters of oil in the system, not 6 liters as some handbooks say.