Adaptive 2

Author
Discussion

southgate

Original Poster:

742 posts

223 months

Thursday 30th August 2007
quotequote all
Using the software for the first time at the weekend on my Tuscan. Noticed that adaptive 1 was well inside the 20% guide range, but adaptive 2 was closer to 30%.

All other readings seemed normal and constant (at same revs)

What does adaptive 2 control?
Is it just one of the banks?


Adam.

Peppe

376 posts

226 months

Thursday 30th August 2007
quotequote all
Yes, adaptive 2 is one of the banks. Cyl 1,2,3 is bank 1 and 4,5,6 is bank 2. It is harder on a SP6 then on a AJP8 to get the adaptives equal on the banks. If you don´t have any faultcodes for the adaptives or a rough running engine, i don´t think you should do anything.

If You need some more explanitions of the different values and codes i would recommend you to download the manual i made for the SP6 software. You can find it on Byker28i:s homepage, you get to the homepage if you look at his PH-profile.

//Peppe

southgate

Original Poster:

742 posts

223 months

Friday 31st August 2007
quotequote all
Thanks Peppe, i'll check out that manual.

My car is running good, so i'll leave it til next service.


Adam.