Discussion
Someone has made a right old mess of the wiring on my sensors.
The plugs have been cut off and some shocking crimping has been used but also the 2 sensors have been joined up some how.
They are both reading 0 or 0.1 v
I've ordered some proper connections but I could do with a diagram to check where each wire should go and to pin it out back to the ecu.
Thanks
The plugs have been cut off and some shocking crimping has been used but also the 2 sensors have been joined up some how.
They are both reading 0 or 0.1 v
I've ordered some proper connections but I could do with a diagram to check where each wire should go and to pin it out back to the ecu.
Thanks
Gassing Station | Speed Six Engine | Top of Page | What's New | My Stuff