Coloured Side Indicators

Coloured Side Indicators

Author
Discussion

drf

Original Poster:

28 posts

291 months

Wednesday 24th January 2001
quotequote all
I have a black Elise and I don't like the look of the orange side Indicators. I bought an aftermarket pair of Vauxhall smoked lights which look much better but they are poor quality (£10) and don't fit as well. One even fell out when cornering hard ! Does any know where to get a good quality set from? On a similar topic, has anyone replaced the front orange indicatiors with the clear ones from a 111? If so, how and how much?

Herbie

31 posts

286 months

Wednesday 24th January 2001
quotequote all
I think I paid about £45 for the clear front indicators with bulbs, from a Lotus dealer. I know Motobuild sell some also, for around the same price. As for the side ones I got some clear Corsa one's for £17 pounds from Auto XS. I am sure most Max Power/Gary boy outlets sell them though. Front indicators are not the easiest to fit though, hope you are not to attached to the skin on your knuckles ;-) Car looks much better for 'em. Think I may do the rear also.

Rob D

2 posts

286 months

Saturday 27th January 2001
quotequote all
Fitted smoked side repeaters from motor-build to my car and it took 4hrs! offside indicator is easy, but to do the nearside you have to shrink yourself to the size of a matchbox to even get near the retaining screws holding it in AND I lost my nut-driver head doing it. Its still in the front clam, slides around under cornering just to remind me not to attempt the job ever again. Nightmare.

drf

Original Poster:

28 posts

291 months

Monday 29th January 2001
quotequote all
What Screws? Are the Moto-build lights the 2 piece universal type that clamp each side of the wing? I looked at these at Graham Goodes in Leicester but I didn't think theirs enough depth behind the light for them. I bet they don't fall out though.

Rob D

2 posts

286 months

Monday 29th January 2001
quotequote all
Sorry I meant front indicators NOT side repeaters and I also meant knuts NOT screws! trying to undo and then re-do the locknuts holding the indicator assembly into the front clam is a real 'mare especially the nearside. and doing the rear indicators (although I havent) looks even worse!