Quarter Turn Fasteners for the Elise S1 and S2
Discussion
QUARTER TURN SOLUTIONS FOR THE ELISE S1 AND S2
After Lotus announced recently that they would not be developing the Quarter turn fasteners for the S2 service panels, a friend and I took up the challenge.
Suppliers permitting, our Quarter Turn kits should be released at the end of next week. This will reduce the 120 or so allen key twists required to remove both panels to around 6 twists per side!
Closely following this will be a Quarter turn kit to replace the smaller fixings of the S1 undertrays (currently in development).
If you're interested please drop me a line at eliseqr@hangar111.co.uk and I'll put you on the mailing list for our progress.
Best Regards,
Greg.
After Lotus announced recently that they would not be developing the Quarter turn fasteners for the S2 service panels, a friend and I took up the challenge.
Suppliers permitting, our Quarter Turn kits should be released at the end of next week. This will reduce the 120 or so allen key twists required to remove both panels to around 6 twists per side!
Closely following this will be a Quarter turn kit to replace the smaller fixings of the S1 undertrays (currently in development).
If you're interested please drop me a line at eliseqr@hangar111.co.uk and I'll put you on the mailing list for our progress.
Best Regards,
Greg.
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff