Elise S1 picture of motion sensor wire needed!
Discussion
Recently bought a, er, rather used S1 Elise which is mechanically decent, but cosmetically (and as I'm finding, perhaps electrically) less so. It has a Cobra 6422 alarm and the wiring to the microwave sensor (the one behind/between the seats) is frayed and must either short or just be disconnected completely.
I occasionally get the tone when arming the alarm which goes if I disable the microwave sensor (with the small button on the remote), which is what I quickly learned to do when the alarm kept going off.
Anyway, I've removed the wires from the unit (weirdly there's only one terminal, the other wires are just pushed in), so with the wires out, I was wondering whether anyone could provide a picture of the correct wiring orientation (4 wires: blue, red, brown & white)? I have some 1mm terminals which will do the job nicely, and I've a soldering iron at the ready - just need to know which way round they go!
I occasionally get the tone when arming the alarm which goes if I disable the microwave sensor (with the small button on the remote), which is what I quickly learned to do when the alarm kept going off.
Anyway, I've removed the wires from the unit (weirdly there's only one terminal, the other wires are just pushed in), so with the wires out, I was wondering whether anyone could provide a picture of the correct wiring orientation (4 wires: blue, red, brown & white)? I have some 1mm terminals which will do the job nicely, and I've a soldering iron at the ready - just need to know which way round they go!
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff