600bhp 1.8T (2.0) Lotus Exige GT3

[Greg_]

This happened...


Engine

VAG 1.8T fully rebuilt to 2 litre spec by JNL Racing
SuperTech Pistons
Integrated Engineering rifle drilled rods
2 litre crank
Big port cylinder head fully gas flowed
SuperTech valves
SuperTech springs and retainers
Integrated Engineering camshaft set
ProAlloy baffled sump


Gearbox

Audi 6 speed box with Quaife slippy diff
Lotus 6 speed gear linkage


Fuel System

ProAlloy 60 litre endurance fuel tank with twin 044 pumps built in
Billet fuel rail
1000cc Bosch injectors


Exhaust System

Owen Developments Garrett GTX3576R turbo
60mm HKS external waste gate
Custom build turbo manifold
Custom build 3 inch down pipe and exhaust system with twin silencers
Pro Alloy custom build inlet manifold


Cooling

Twin front mounted air to oil coolers
ProAlloy three pass race radiator
ProAlloy charge cooler & pre-rad
SPAL twin fans


Electrics

Syvecs S6GP ECU
Custom built wiring loom
AIM dash with data logger
All sensors wired in to AIM dash
Drive by wire throttle body & pedal sensor
Launch control
Traction control


Bodywork

Extra wide Lotus Exige GT3 motorsport bodywork
Built on a 2001 Elise chassis


Wheels & tyres

17x8 front, and 18x11 rear wheels
Running 245/40/17 front and 315/30/18 rear Toyo R888 tyres


Brakes & Suspension

AP disks
AP 4 pot front callipers & 2 pot rears
Pagid Pads
Nitron NTR 46mm suspension & geo


Result

567 bhp at 7,450 rpm
405 lb/ft at 7,150 rpm

Edited by Greg_ on Tuesday 19th April 16:26

[Greg_]

http://www.dyno-plot.co.uk/dyno/dynoplot/id%3D3425...

[Soov535]

[xjay1337]

(where's that Max Talk matey from the diesel threads who will come along to claim this power is not do-able lol)

[kambites]

Presumably a dedicated track car since it has no rear lights?

I'm guessing throttle modulation proves... interesting with around 800bhp/tonne and 300bhp/litre from a single turbo.

[MrBarry123]

That's one hell of an introduction...

[Greg_]

It should be just over 700bhp / ton at the minute, weighing around 800kg.

It will be used on track to start with until it is set up perfectly, then the plan will be to get it road legal.

[Exige77]

When will it be finished ?

[Tiger Tim]

Exige77 said:

When will it be finished ?

Damnit that was going to be my joke! Greg is it actually finished now? Since you're no longer on seloc I have no clue where you got to.

[Greg_]

I'm getting it finished in my own time, as I have an 18 month old daughter now and an 8 month pregnant wife.

[zebra]

Greg_ said:

I'm getting it finished in my own time, as I have an 18 month old daughter now and an 8 month pregnant wife.

You've been rather busy haven't you.

[Altrezia]

Glad to see you're still working on it

[dom9]

Good to see this is still alive!

Look forward to more updates!

[Potatoes]

Holy moley!

[the ronin]

xjay1337 said:

(where's that Max Talk matey from the diesel threads who will come along to claim this power is not do-able lol)

This power was surpassed 5 yrs. ago.

[Greg_]

Yeah, I bet your bum dildo had 1,000bhp when you were 8?

Edited by Greg_ on Sunday 24th April 21:15

[Exige77]

Greg_ said:

Yeah, I bet your bum dildo had 1,000bhp when you were 8?

Edited by Greg_ on Sunday 24th April 21:15

1001

[TartanPaint]

Greg_ said:

Yeah, I bet your bum dildo had 1,000bhp when you were 8?

Edited by Greg_ on Sunday 24th April 21:15

I suspect you don't know who Frank (Ronin) is...

Allow me: https://www.youtube.com/results?search_query=ronin...

[the ronin]

Ya see Greg has to get down in the dirt because this screwed up project has taken years of BS excuses to get to this state of never getting finished....

http://arc.seloc.org/viewthread.php?tid=367008&amp...

Edited by the ronin on Tuesday 26th April 00:45

[EX51GE R]

Ronin, wind your fuc*ing neck in. How about just being nice for once and maybe saying 'hey well done' ??