Electrical help

Author
Discussion

TheTalentedMr

Original Poster:

221 posts

210 months

Saturday 28th December 2013
quotequote all
This maybe an easy fix with some advice from someone on here!

Car is an '08 MY Exige.

Problem: Indicators and hazards not working, fuse is ok on both, switch is ok on both. Now I assumed it must be the relay but when I arm the alarm all of the indicators flash so surely it must power the relay to do that which means it should be working right?? to add to the problem (or just sheer coincidence) the A/C is not working either?

Help greatly appreciated as I don't want to drive it down to the garage without the indicators functioning.

Also, is the relay attached to the indicator stalk under the steering cowl or is it somewhere else? If the general view is try the relay then where's the best place to order one from on-line.

It goes without saying but, as always, thanks for any responses.

The Bandit

788 posts

200 months

Saturday 28th December 2013
quotequote all
Try pushing/waggling about the hazard light switch, common problem

grumpy

967 posts

246 months

Saturday 28th December 2013
quotequote all
I had a headlamp fail. It was the switch pack modual. It controls a number of functions. Not sure about yours as mine is a 55 K series.

TheTalentedMr

Original Poster:

221 posts

210 months

Sunday 29th December 2013
quotequote all
Thanks for all the help and a push in the right direction. Seems like its a common problem after reading this : http://www.lotustalk.com/forums/f322/turn-signal-n...

Thought I'd post the link in case anyone else suffers the same thing in the future.

I've not had a chance to look at the car since posting but with all this info I'm sure I'll get it solved.