New TRD + LED Rear Lights :)))

[Paza3]

Well gents

Treating the Exige to a new TRD Box and Led Rear Lights cannot wait for them to all arrive .. and a service next Friday but that's a lot less interesting

Been doing a tad reading is there anything I should be aware of before fitting the above seems straight forward enough, anyone have a personal experience or helpful advice on the fitting process

Lights are plug and play?

and TRD is take the back wheel off for access?

Cheers Paza

[ad243S]

You can install the TRD through the engine bay without taking the wheel off but either way you may lose some skin off your hands as its tight.

[mikeulster500]

Paza3 said:

Well gents

Treating the Exige to a new TRD Box and Led Rear Lights cannot wait for them to all arrive .. and a service next Friday but that's a lot less interesting

Been doing a tad reading is there anything I should be aware of before fitting the above seems straight forward enough, anyone have a personal experience or helpful advice on the fitting process

Lights are plug and play?

and TRD is take the back wheel off for access?

Cheers Paza

Can't help on the lights, as my car came with LED's. On the TRD, I would take the rear wheel off and wheelarch liner. I did this when I fitted mine and that was fiddly enough. Top tip, you may want to order up some replacement wheelarch liner screws, as they seem to get destroyed (plastic), when you take them out. I got these from Bell and Colvill

[Paza3]

Thanks for the tips guys!!

Lights were easy to install!! plug and play

cheeky little pic with them fitted