How hard can it be to adjust the Dip beam

[Catton21]

I have a 2008 Elise SC. All I need to do is adjust the dipbeam to pass the MOT. So after looking through the owners manual, I went to remove the access panel from the wheel arch.... no access panel Mmmm, So unscrewing and pulling back the inner wheel to find the 3 screws to undo.....It looks very different from the manual, no screws to undo with the alan key supplied. Did lotus change the front lights on the SC? Any tips would be great

[zasker]

Should be 2 black plastic screws at the bottom which won't screw out. You need to get a flat point screwdriver under the head and gently prise them out. There should also be a philips headed screw near the top of the wheel arch liner just inside the wheel arch lip.

[Eat it up]

http://www.lotustalk.com/forums/attachments/f129/9...

As simple as turning a screw, Anti-clockwise to lift, clockwise to lower.

Don't be prising any screw's out.!!!!..

Edited by Eat it up on Tuesday 15th November 22:37