Saab 9000 Servo

[Elfit]

Hi Folks
I am looking for a Servo from an early Saab 9000.

It is for my 1989 TVR S2.
When built, the Servo and master cylinder came from the early (non ABS) Saab
9000. The only details I have are here:
http://www.parkersteve.dsl.pipex.com/sparts.html
(Scroll down half way for brakes)

I know that my servo is going to need replacing before too much longer.

Please can you help?

Does anyone know which model of the 9000 had this type of servo so that I can start looking for a second hand/ cheap replacement.

Many thanks from a refugee from the TVR board!
Tim

[Boosted LS1]

I couldn't open your link.

[Prof Beard]

I have a feeling it was the very first 9000s that were non-ABS

have a look through the links on here:

http://www.saabcentral.com/features/9000_index.php

[Elfit]

Thanks for your help so far.
The link says
part Lucas TRW PSA314
For Saab 9000 6/84 on 8958423
Does that last bit mean anything to you Saab folk?
Cheers Tim

[NiceCupOfTea]

7 digits sounds right for a Saab part no.

You need somebody with the EPC - I have it but not installed currently, anybody?

I'm surprised that any 9000s were built without ABS, must be a very early one as said.

[ylee coyote]

afik all 9000's had ABS
I know of none without
900's are a different matter
Saab made a big play on safety when they launched it

[Prof Beard]

ylee coyote said:

afik all 9000's had ABS
I know of none without
900's are a different matter
Saab made a big play on safety when they launched it

If you look at the history stuff on Saab Central, it seems the very first 9000s didn't have ABS - see: http://quasimotors.com/model_evolution.htm