Saab 9-5 fault codes

[jackthelad1984]

Does anyone know what fault codes p1000 and p1110 are for a 2002 9-5 aero hot?
Just got a bluetooth obd reader and the torque pro app on my phone and these two codes are coming up, I believe p1110 is to do with the pipes to or from the dump valve? But Google is not helping with the p1000 code?
Also got all the brake/abs/to lights on which I believe is a dodgy abs module?
Cheers all

[otolith]

Have you checked that none of the rat's nest of tubes at the back of the engine bay are disconnected?

[CB2152]

Don't know whether you'd have seen this while Googling:

http://www.2carpros.com/articles/scan-test-is-inco...

Looked on UKSaabs and couldn't see P1000 on the list of codes, searching the whole site only brings up something about wet and dry sanding...

[CB2152]

P1110 does seem to be related to the charge air bypass valve. As Otolith said, make sure all the pipes are connected and not perished (i.e. They're still flexible and rubbery, not brittle). There's a particular valve thing attached to the bulkhead which is a 3-way unit, the pipes can fall off that quite easily.

[jackthelad1984]

Yes I found that myself and will go check the hoses today when my other half gets home with the car (she's using it while her panda is being fixed and moaning about the fuel usage as I'm laid up with a broken kneecap). I couldn't find anything online for the p1000 code though.

[scrwright]

Would suggest getting some replacement 4mm silicone hose before you poke at the hoses. I have had them disintegrate on me just with touching them. Just got some for mine off ebay for less than a fiver delivered.