Cordless Drill Recommendations
Cordless Drill Recommendations
Author
Discussion

Glassman

Original Poster:

25,022 posts

245 months

Monday 13th October 2008
quotequote all
So I need a new cordless drill.

Long story, but see my other thread, smile

Quite like the Makita range; the one I smashed up was Ingerssol Rand (I use it mostly for automotive stuff, but now I am SuperDIYman too).

Recommendations, please. It needs to have a good battery life, like the Milwaukees... (I think they have the Lithium-ION batteries which tend to last 'kin ages). I do use a Milwaukee tool which I have to say, is great; but are their drills any good?! It would be handy for ease of battery charging etc.

cjs

11,684 posts

281 months

Monday 13th October 2008
quotequote all
I have one of these, in fact we have 5 on our firm.

http://www.screwfix.com/prods/68747/Power-Tools/Co...


Does everything you will ever want and comes with three batteries. Great value too.


ETA. It is a little heavy to use over long periods, if your doing a lot of screwing....oh er missus!

Edited by cjs on Monday 13th October 07:50

callyman

3,195 posts

242 months

Monday 13th October 2008
quotequote all
My Brother (been a builder for 25+ years) only uses Makita now and they are amazing quality, I would highly recommend them.

Roop

6,018 posts

314 months

Monday 13th October 2008
quotequote all
Hilti. Simple as.

eldudereno

997 posts

257 months

Monday 13th October 2008
quotequote all
I agree, the Makita at Screwfix is a very good deal.

spydersingh

698 posts

245 months

Monday 13th October 2008
quotequote all
callyman said:
My Brother (been a builder for 25+ years) only uses Makita now and they are amazing quality, I would highly recommend them.
+1

Simond001

4,519 posts

307 months

Monday 13th October 2008
quotequote all
cjs said:
I have one of these, in fact we have 5 on our firm.

http://www.screwfix.com/prods/68747/Power-Tools/Co...


Does everything you will ever want and comes with three batteries. Great value too.


ETA. It is a little heavy to use over long periods, if your doing a lot of screwing....oh er missus!

Edited by cjs on Monday 13th October 07:50
I'd agree. Have the same drill although only cam ewith two batteries when i bought it.

The chuck fell apart after a few weeks, and SF replaced there and then.

elster

17,517 posts

240 months

Monday 13th October 2008
quotequote all
Personally I use DeWalt one for litle things, lightweight drill. I also have a Milwaukee one for proper drilling, but just for home use I would just but something cheap like a Ryobi. No point spending £300 on something that isn't really going to get hammer, when less than £100

Plotloss

67,280 posts

300 months

Monday 13th October 2008
quotequote all
If its a drill/driver you want then Makita Li-Ion

If its a cordless SDS you want then Hilti

jag guru

556 posts

228 months

Thursday 16th October 2008
quotequote all
Glassman said:
So I need a new cordless drill.

Long story, but see my other thread, smile

Quite like the Makita range; the one I smashed up was Ingerssol Rand (I use it mostly for automotive stuff, but now I am SuperDIYman too).

Recommendations, please. It needs to have a good battery life, like the Milwaukees... (I think they have the Lithium-ION batteries which tend to last 'kin ages). I do use a Milwaukee tool which I have to say, is great; but are their drills any good?! It would be handy for ease of battery charging etc.
Milwaukee is very good especially the LI-ON version. As you
say the battery lasts ages. But they are expensive........as are the
my preference De-Walt...I'd go for at least a 24V.

Slightly OT we had two De- Walt 110v's a 600w pistol and a larger
SDS stolen from a job recently. I think they just lifted the boxes
assuming they were 240v,s as they left the transformer behind.

So whatever, you choose watch where you leave it. They are too
expensive to lose these days.

NiceCupOfTea

25,595 posts

281 months

Thursday 16th October 2008
quotequote all
I got this Bosch from Screwfix

http://www.screwfix.com/prods/41479/Power-Tools/Co...

My brother and dad both have the same drills which have received a fair bit of abuse over the last couple of years and they seem very good.

Two batteries, hammer, variable speed, nicely weighted,althought was 130 when I bought it. Makita looks a good deal though as well.

dirkgently

2,160 posts

261 months

Thursday 16th October 2008
quotequote all
jag guru said:
Glassman said:
So I need a new cordless drill.

Long story, but see my other thread, smile

Quite like the Makita range; the one I smashed up was Ingerssol Rand (I use it mostly for automotive stuff, but now I am SuperDIYman too).

Recommendations, please. It needs to have a good battery life, like the Milwaukees... (I think they have the Lithium-ION batteries which tend to last 'kin ages). I do use a Milwaukee tool which I have to say, is great; but are their drills any good?! It would be handy for ease of battery charging etc.
Milwaukee is very good especially the LI-ON version. As you
say the battery lasts ages. But they are expensive........as are the
my preference De-Walt...I'd go for at least a 24V.

Slightly OT we had two De- Walt 110v's a 600w pistol and a larger
SDS stolen from a job recently. I think they just lifted the boxes
assuming they were 240v,s as they left the transformer behind.

So whatever, you choose watch where you leave it. They are too
expensive to lose these days.
Would you steal a transformer? They are going to sell them down the pub not use them.

jag guru

556 posts

228 months

Thursday 16th October 2008
quotequote all
dirkgently said:
jag guru said:
Glassman said:
So I need a new cordless drill.

Long story, but see my other thread, smile

Quite like the Makita range; the one I smashed up was Ingerssol Rand (I use it mostly for automotive stuff, but now I am SuperDIYman too).

Recommendations, please. It needs to have a good battery life, like the Milwaukees... (I think they have the Lithium-ION batteries which tend to last 'kin ages). I do use a Milwaukee tool which I have to say, is great; but are their drills any good?! It would be handy for ease of battery charging etc.
Milwaukee is very good especially the LI-ON version. As you
say the battery lasts ages. But they are expensive........as are the
my preference De-Walt...I'd go for at least a 24V.

Slightly OT we had two De- Walt 110v's a 600w pistol and a larger
SDS stolen from a job recently. I think they just lifted the boxes
assuming they were 240v,s as they left the transformer behind.

So whatever, you choose watch where you leave it. They are too
expensive to lose these days.
Would you steal a transformer? They are going to sell them down the pub not use them.
Yes.........probably. They were left in a private
house, along with a lot of other materials overnight. Only because
the owner stated " everything will be fine ".

Unfortunately, he had all sorts of various people doing different
work in the house . Unbeknown to us, at the time.
So, we broke our own golden rule on this occasion. Lesson learned.

Personally, if it's offered to anyone " down the pub " it's
obvious it's stolen. And if anyone buys it, which I agree someone
will..... that just encourages it, imo.



Edited by jag guru on Thursday 16th October 09:40

dirkgently

2,160 posts

261 months

Thursday 16th October 2008
quotequote all
jag guru said:
dirkgently said:
jag guru said:
Glassman said:
So I need a new cordless drill.

Long story, but see my other thread, smile

Quite like the Makita range; the one I smashed up was Ingerssol Rand (I use it mostly for automotive stuff, but now I am SuperDIYman too).

Recommendations, please. It needs to have a good battery life, like the Milwaukees... (I think they have the Lithium-ION batteries which tend to last 'kin ages). I do use a Milwaukee tool which I have to say, is great; but are their drills any good?! It would be handy for ease of battery charging etc.
Milwaukee is very good especially the LI-ON version. As you
say the battery lasts ages. But they are expensive........as are the
my preference De-Walt...I'd go for at least a 24V.

Slightly OT we had two De- Walt 110v's a 600w pistol and a larger
SDS stolen from a job recently. I think they just lifted the boxes
assuming they were 240v,s as they left the transformer behind.

So whatever, you choose watch where you leave it. They are too
expensive to lose these days.
Would you steal a transformer? They are going to sell them down the pub not use them.
Yes.........probably. They were left in a private
house, along with a lot of other materials overnight. Only because
the owner stated " everything will be fine ".

Unfortunately, he had all sorts of various people doing different
work in the house . Unbeknown to us, at the time.
So, we broke our own golden rule on this occasion. Lesson learned.

Personally, I don't buy anything from anyone " down the pub " it's
obvious it's stolen..........and that just encourages it,imo.

I despise people who steal tools.
Not only do you steal the victims money,you steal their ability to make money.

Hyperion

16,952 posts

230 months

Thursday 16th October 2008
quotequote all
It all comes down to the battery really...as said Lithium Ion is best, but expensive to buy and replace. NiMh (Nickel metal hydride) is good for battery life (no memory effect http://en.wikipedia.org/wiki/Memory_effect ) V's cost. Avoid anything with Ni-cads in - they suffer from memory effect and don't last very long.

Edited by Hyperion on Thursday 16th October 09:44