Bumper scuff - best course of action

Bumper scuff - best course of action

Author
Discussion

NiceCupOfTea

Original Poster:

25,374 posts

266 months

Sunday 22nd June
quotequote all
Rolling my wife’s car forward on the drive I kissed a brick pillar cry



It’s Mazda soul red which apparently is a pain to match. Our local body shop have just closed down. Does it look like a smart repair would be ok on it or would it need full/partial respray of bumper?

What sort of cost am I looking at and any recommendations in SE London?

Proper rubbish day and this was the crowning glory.



InitialDave

13,152 posts

134 months

Sunday 22nd June
quotequote all
I'd go with a smart repair, yes. I think tbh touching in and sanding/polishing would get it mostly sorted.

Don't forget, you know it was damaged, so you'll always spot the slightest mismatch. Most people would barely register.

Belle427

10,521 posts

248 months

Sunday 22nd June
quotequote all
Just try touching it up first if your not too bothered.
Colour matching will be your issue, plastic bumpers can be especially tricky to get right.
May benefit you to visit the smart repairer for a chat first if you choose that repair.

paintman

7,815 posts

205 months

Sunday 22nd June
quotequote all
IIRC that's a 3 coat colour, solid base coat, effects coat containing the metallic/pearl/xirillics, clear coat over the top.
Can be a PITA with matching.

Red9zero

8,931 posts

72 months

Sunday 22nd June
quotequote all
Just seen your post on the CX5 Facebook group. I love the soul Red, but we ended up with boring arctic white. Our neighbour recently caught the bumper in the same place, but I managed to polish out 99% of the marks with a small touch in on a couple of chips. I'd be tempted to try that on yours to start with, as I have seen a few posts on the FB group of people having difficulties matching the soul Red. Alternatively I'd try a proper Mazda bodyshop or one approved by them as it is a pretty common colour.

NiceCupOfTea

Original Poster:

25,374 posts

266 months

Sunday 22nd June
quotequote all
That’s what I’m afraid of. I know soul red is horrendous for paint matching. We had a good local body shop who the local Mazda dealer used for repairs and they did a great job when the neighbour backed into it. Sadly they went to the wall about 6 months ago. Would like to get a decent job on it but I am afraid a bumper respray will be £500+ on a 13 year old car. Wife’s car and my fault though so…

NiceCupOfTea

Original Poster:

25,374 posts

266 months

Sunday 22nd June
quotequote all
Red9zero said:
Just seen your post on the CX5 Facebook group. I love the soul Red, but we ended up with boring arctic white. Our neighbour recently caught the bumper in the same place, but I managed to polish out 99% of the marks with a small touch in on a couple of chips. I'd be tempted to try that on yours to start with, as I have seen a few posts on the FB group of people having difficulties matching the soul Red. Alternatively I'd try a proper Mazda bodyshop or one approved by them as it is a pretty common colour.
Won’t polish out, it’s down to and through the base coat.

Red9zero

8,931 posts

72 months

Sunday 22nd June
quotequote all
NiceCupOfTea said:
Won t polish out, it s down to and through the base coat.
Ugh frown Soul Red is such a nice colour, oddly even better through polarising sunglasses, but times like this I'm glad we went for the Arctic White.

NiceCupOfTea

Original Poster:

25,374 posts

266 months

Sunday 22nd June
quotequote all
Red9zero said:
Just seen your post on the CX5 Facebook group. I love the soul Red, but we ended up with boring arctic white. Our neighbour recently caught the bumper in the same place, but I managed to polish out 99% of the marks with a small touch in on a couple of chips. I'd be tempted to try that on yours to start with, as I have seen a few posts on the FB group of people having difficulties matching the soul Red. Alternatively I'd try a proper Mazda bodyshop or one approved by them as it is a pretty common colour.
Won’t polish out, it’s down to and through the base coat.