Rust converter

[ssray]

My mk4 golf has had a few holes punched by someone using a bottle jack and not a normal one.
Bloke is coming over Monday to plate the holes, what can I spray into the holes to get as far as possible some protection?
Ta Ray

[Belle427]

Jenolite do a converter spray if thats what your after, id be inclined not to spray any wax type products in there if welding is taking place.
Bilt Hamber make some of the best rust related products too but their stuff is brush on.
Depends how severe the rust is, might be better to let the guy doing the repair get on with it.

[ssray]

Belle427 said:

Jenolite do a converter spray if thats what your after, id be inclined not to spray any wax type products in there if welding is taking place.
Bilt Hamber make some of the best rust related products too but their stuff is brush on.
Depends how severe the rust is, might be better to let the guy doing the repair get on with it.

Thanks, it's mainly because there are holes I could get quite a way into the outer sills, wouldn't use wax because of the heat of welding.
I'll look up the jenolite spray
Thanks