Aldi Petrol Jetwash

[RZ1]

I have got an Aldi Petrol Jet Wash which is labelled as a Scheppach HCP2600, i would like to get a snow foam and also a short trigger for this, but not sure which ones i need.

Currently the connectors that fit onto the lance are the quick release ones where you pull back on the collar and put a different coloured tip on.

The connector that attached to the current trigger is a screw on type.

Does anyone have this jet wash and able to recommend a short trigger and a snow foam bottle?

[somouk]

Send some pictures to the guys at cleanyourcar.co.uk and they'll be able to advise.

[S13_Alan]

I have one too and did what you're after recently.

If you just want to replace the lance in one go and are happy screwing and unscrewing the gun off, I got this - https://www.amazon.co.uk/dp/B0953PNQYL

I also wanted a QR (larger size here) to change between it and the regular gun that came with it, so I also got two of these and fitted both guns with one and hose with one of the remaining parts, but that's obviously optional - https://www.amazon.co.uk/dp/B09F2CNYJ7?

Then for snow foam any regular QR (smaller size for this) one will do, I just went for the Autoglym one as I was in Halfords - https://www.halfords.com/motoring/car-cleaning/ext...

Did take me a while to work it out as I'd never had a power washer that was the standard screw fittings, always seems to be manufacturer specific ones. But very pleased with that setup now!

Think I could also have done something with a shorter lance section and using the original gun but I wanted the really short one.

Hope that helps.