Non dash damage advice

Non dash damage advice

Author
Discussion

hellorent

Original Poster:

513 posts

70 months

Wednesday 22nd March 2023
quotequote all
Hi all,

Got a lease car and want to stick one of those mobile phone disks on the dash to
mount a mob phone holder, any suggestions for a glue/adhesive that wont mark or
damage the dash when removed, I was thinking of using a silicone sealer but don't know
if it will leave any marks

Any suggestions welcomed, it's a Audi A6 if that makes any difference.

TwinKam

3,163 posts

102 months

Wednesday 22nd March 2023
quotequote all
No help to you, but I've long thought that car manufacturers should all be providing a smooth 3" circle moulded somewhere on the dash as standard.
I think drivers were saying similar about heaters/radios/seatbelts in the 60s/70s tbh so we must be patient, it might yet happen.

QJumper

2,709 posts

33 months

Thursday 23rd March 2023
quotequote all
Maybe something like Sugru would do it. It's a kind of adhesive putty, which is removable.

Scrump

22,933 posts

165 months

Thursday 23rd March 2023
quotequote all
An alternative solution is to get a rubber mat with the plastic circle in the middle. I use one in my van and it holds the Satnav perfectly.
£6 from eBay!

somouk

1,425 posts

205 months

Friday 24th March 2023
quotequote all
If you stick it down for any amount of time it will likely affect the dash and also show some discolouring where UV effects the dash.

Go with a vent mounted clip on or similar and not something that will risk damaging the car.

gweaver

911 posts

165 months

Friday 24th March 2023
quotequote all
somouk said:
Go with a vent mounted clip on or similar and not something that will risk damaging the car.
That's seems like a contradiction, given that lots of cars have broken vent fins from those clips.

Can anyone recommend a vent mount that grips the sides of the vent, rather than the fins?