2013 Kuga front wheel bearing replacement
Discussion
Rusty/seized nuts and bolts.
Having done one on a focus so similar, the shock bolts were very tight. Also the abs sensor is a pain to remove sometimes.
On my brothers volvo so again same setup we found we had an abs fault after fitting as the knuckle was worn so the hub and bearing would move when the hub bolt was tightened.
Having done one on a focus so similar, the shock bolts were very tight. Also the abs sensor is a pain to remove sometimes.
On my brothers volvo so again same setup we found we had an abs fault after fitting as the knuckle was worn so the hub and bearing would move when the hub bolt was tightened.
vw_99 said:
Rusty/seized nuts and bolts.
Having done one on a focus so similar, the shock bolts were very tight. Also the abs sensor is a pain to remove sometimes.
On my brothers volvo so again same setup we found we had an abs fault after fitting as the knuckle was worn so the hub and bearing would move when the hub bolt was tightened.
Thanks Having done one on a focus so similar, the shock bolts were very tight. Also the abs sensor is a pain to remove sometimes.
On my brothers volvo so again same setup we found we had an abs fault after fitting as the knuckle was worn so the hub and bearing would move when the hub bolt was tightened.
Gassing Station | Suspension, Brakes & Tyres | Top of Page | What's New | My Stuff