any ex factory techs on here?

[gcpeters]

Howdy all

does anyone know if there are any ex factory techs knocking about piston heads? i really badly need to get hold of a new style dash speedo wiring diagram (digital odometer) for a 2003 cerb but cant find it anywhere! only have the old diagram

tried everywhere and still no joy, hoping that maybe an ex factory tech will know someone who did it and might have them somewhere!

thanks

Grant

[Larco]

Try Cath Mason. The lady who built the Dash electronics in the factory.
I think she ia still contactable on CM Electrics.. mobile [phone].

[BPP]

Hi, Im ex factory. The problem would be the more unusual electrical work was carried out by auto electritians, that did the jobs for the mechanics. Dont know if any on here but someone might pop up. What is the problem you are having? as if i can be of any help i will try to help you out.

[BPP]

Larco said:

Try Cath Mason. The lady who built the Dash electronics in the factory.
I think she ia still contactable on CM Electrics.. mobile [phone].

Good advice from Larco. Cath is good and i know if she can be of any help then she will.

[gcpeters]

thanks for the replys everyone

basically i have a 98 year cerbera and in progress of swapping out the speedo / rev counter with a black set from a 2002 car. The problem is that the connector on the 2002 car is totally different to that of my current one!

the 98 dials are the ones with the analog odometer, whereas the 2002 has the digital one.

i have the wiring diagram for the 98 model, which was lucky! but need the 2002 one so that he can re-wire and make the necessary changes

so if anyone has the diagram, or knows who in the factory might have the cad diagram etc i would be very very gratefull (easily rewarded with stella for these efforts!)

im going to call Cath now

thanks

Grant

Edited by gcpeters on Wednesday 28th October 12:26

[BPP]

May also be worth talking to mv automotive. He is on here as mvautomotive and he works from the old factory. 0771787292

[glow worm]

Yes, Mike Vernon is a good man.....he sorted out my lights and wiring loom.