HT Leads for '98 Griff
HT Leads for '98 Griff
Author
Discussion

grm500

Original Poster:

158 posts

289 months

Monday 12th January 2004
quotequote all
Hope someone has experience they can pass on.

Advised I need new HT leasd as they are breaking down under load, been recommended Magnecor wires, by 2 TVR drivers. Magnecor recommend 8.5mm KV85 Competition Cable or 8mm Electrosports 80 Cable, the only difference being price and greater heat protection for the 8.5mm; I drive almost exclusively on road, may do a couple of track things this year - what's the best cable to go for?

They come with a 10 year warranty - do my existing factory fitted wires have warranty on them from OEM?

Thanks

GRM500

siwes

347 posts

287 months

Monday 12th January 2004
quotequote all
I fitted the 8mm leads supplied by ACT along with a lot of other things , new shields as well dizzy and coil , coil amp and plugs , well worth it the difference with the leads is noticable.
I woul recommend to anyone. By the way mine is a Griff 500 97
regards
Simon

rev-erend

21,619 posts

312 months

Monday 12th January 2004
quotequote all
I fitted the 8.5 mm jobbies supplied byu ACT (best price around) .. and they look great on my SEAC.

Performance - did not notice either way... no better or worse.

jam1et

1,536 posts

280 months

Monday 12th January 2004
quotequote all
Check this out if you need new leads:
[url]www.pistonheads.com/sales/detail.asp?i=18203&s=7[/url]

glena

362 posts

276 months

Monday 12th January 2004
quotequote all
Anyone tried the Red 10mm Magnecors?


>> Edited by glena on Monday 12th January 23:21

HarryW

15,998 posts

297 months

Monday 12th January 2004
quotequote all
I'm a bit of a muppet when it comes to this subject, I use standard RR classic oem leads which cost about £24 a set, they last a year or so, when they play up ditch them and start again.
I think that the extenders can be had for about £3 each, check with Tim at ACT, same for the magnecors whatsits [url]here|www.actproducts.co.uk[/url]

Harry

andy4200

5,124 posts

301 months

Tuesday 13th January 2004
quotequote all
glena said:
Anyone tried the Red 10mm Magnecors?


>> Edited by glena on Monday 12th January 23:21


I've got red ones on the cerb, I think it's Magnecor (bout 90 quid or so a set maybe). They were put on at the last service cause one of the oem leads had melted at the plug and was misfiring. I haven't really checked them but I'll have a look at the next service and see what condition they are in. No problems so far that I've noticed.

david010167

1,397 posts

291 months

Tuesday 13th January 2004
quotequote all
Mine are RED leads on a Griff 500 1995. I must admit I did notice a difference, but then again one of my leads had almost sheared through and was possibly not being the most efficient at transporting current.

I also ordered them from Tim at ACT and had excellent next day service.

David

budd

407 posts

296 months

Wednesday 14th January 2004
quotequote all
Check out the leads for sale on Ebay noticed a nice set of Mallory leads on a few days ago.