URGENT HELP - Away at hotel and pass door wont close
Discussion
Hi all,
Really need some help, we've come away to a health spa, wife went to close the passenger door and it just bangs on the latch and wont close. The drivers door will shut but sometimes is not opening on the button. The main problem is i cant shut the passenger to lock the car
and it's stuck outside, no alarm and an open door.
I've had a look at the latch and it turns freely, are there anyways to get the door closed.
Car is a 1996 Chimaera
Many thanks,
Really need some help, we've come away to a health spa, wife went to close the passenger door and it just bangs on the latch and wont close. The drivers door will shut but sometimes is not opening on the button. The main problem is i cant shut the passenger to lock the car
and it's stuck outside, no alarm and an open door.I've had a look at the latch and it turns freely, are there anyways to get the door closed.
Car is a 1996 Chimaera
Many thanks,
Edited by Evo on Friday 25th September 20:24
I'm no expert but here's something to try,
does the actual lock mechanism lock without the door (ie use a screwdriver to close the lock)
if it does, perhaps the door has slipped slightly and needs lifted slightly to engage?
Also, where are you, perhaps some friendly type lives nearby?
GoodLuck
Mark
does the actual lock mechanism lock without the door (ie use a screwdriver to close the lock)
if it does, perhaps the door has slipped slightly and needs lifted slightly to engage?
Also, where are you, perhaps some friendly type lives nearby?
GoodLuck
Mark
This happened to me after I had the chassis replaced, strangely it was only a problem when the car was warm.
If you look at the catch on the body of the car you will see that it is packed out with spacers. You will need an alum key for this but I loosened the catch (be careful not to loosen it too much as there is a nut on the end of the screw and if it falls inside you will have to pull the interior back to retrieve it) and added four pieces of metal evenly spaced - effectively adding another spacer.
Hope this helps and good luck.
If you look at the catch on the body of the car you will see that it is packed out with spacers. You will need an alum key for this but I loosened the catch (be careful not to loosen it too much as there is a nut on the end of the screw and if it falls inside you will have to pull the interior back to retrieve it) and added four pieces of metal evenly spaced - effectively adding another spacer.
Hope this helps and good luck.
Hi guys,
All fixed, i gave in and called a very nice man in a yellow van.
It turned out to be the plastic cover over the door latch, it had bent slightly and was stopping the latch from turning when the door catch touched it. The AA chap held the latch with a screwdriver while i operated the door knob.
Definately going to carry some tools in the boot now. I've cut the offending piece of plastic away, oiled the door latches and all seems well.
Thankyou all for the prompt replies.
All fixed, i gave in and called a very nice man in a yellow van.
It turned out to be the plastic cover over the door latch, it had bent slightly and was stopping the latch from turning when the door catch touched it. The AA chap held the latch with a screwdriver while i operated the door knob.
Definately going to carry some tools in the boot now. I've cut the offending piece of plastic away, oiled the door latches and all seems well.
Thankyou all for the prompt replies.
Gassing Station | General TVR Stuff & Gossip | Top of Page | What's New | My Stuff


