Mouse
Author
Discussion

jvr

Original Poster:

789 posts

277 months

Tuesday 5th August 2008
quotequote all
A mouse for a computer is a pretty reliable piece of kit i would have thought but i've got one of those silver TVR Tuscan ones from Street Mouse.When i use the little wheel to scroll down it keeps wanting to go upwards.Do you think it might need a rebuild or is there a simple solution,any sugestions welcome.
Paul

stainless_steve

6,052 posts

288 months

Tuesday 5th August 2008
quotequote all
Pre-oiler yes

Big Al.

69,336 posts

288 months

Tuesday 5th August 2008
quotequote all
jvr said:
A mouse for a computer is a pretty reliable piece of kit i would have thought but i've got one of those silver TVR Tuscan ones from Street Mouse.When i use the little wheel to scroll down it keeps wanting to go upwards.Do you think it might need a rebuild or is there a simple solution,any sugestions welcome.
Paul
NO, they all do that sir! hehe

Pupp

12,971 posts

302 months

Tuesday 5th August 2008
quotequote all
Does it sound a bit tappety?

jvr

Original Poster:

789 posts

277 months

Tuesday 5th August 2008
quotequote all
Pupp said:
Does it sound a bit tappety?
Well when i first turn the computer on its a bit rough

Pupp

12,971 posts

302 months

Tuesday 5th August 2008
quotequote all
jvr said:
Pupp said:
Does it sound a bit tappety?
Well when i first turn the computer on its a bit rough
Think the warranty will cough up? Sounds like wear and tear to me frown

jvr

Original Poster:

789 posts

277 months

Tuesday 5th August 2008
quotequote all
Thats what i thought,but the warranty company says it only covers road use not competion use or surfing...

RIP_puffsorted2

2,442 posts

255 months

Tuesday 5th August 2008
quotequote all
Hmmm sounds like you have one of the new fangled models with the Intel Pentium S6 processor in. Try one of the previous generation mice with the AMD Athelon RV8 chips, apparently their a lot more longer lasting

russ turner

239 posts

238 months

Tuesday 5th August 2008
quotequote all
My red one works fine at all times althugh it does have a tendency to slide off to the right or the left depending on how it feels. People have also commented on that the headlights are too bright and that the blue tinge is a bit blinding

central

16,745 posts

247 months

Tuesday 5th August 2008
quotequote all
Pupp said:
Does it sound a bit tappety?
rofl

Cerberowner

385 posts

243 months

Wednesday 6th August 2008
quotequote all
Should have bought a green one - they're quickest laugh

chim

245 posts

227 months

Wednesday 6th August 2008
quotequote all
It's the stepper motor or it could be the giggling pin on the end of the laughing half shaft

Edited by chim on Wednesday 6th August 10:24

Tvrjock

350 posts

222 months

Wednesday 6th August 2008
quotequote all
chim]It's the stepper motor or it could be the giggling pin on the end of the laughing half shaft[footnote]Edited by chim on Wednesday 6th August 10:24[/footnote said:
Na sounds like the lambretta sensors, has the engine had a rebuild before you got it AJP and all thatbiglaugh

WOO5IE

966 posts

227 months

Wednesday 6th August 2008
quotequote all
What year is it as they may want to tax it ( MED )

jvr

Original Poster:

789 posts

277 months

Wednesday 6th August 2008
quotequote all
I've rang my local expert and he said it is quite common,using the mouse before its properly warmed up causes stuttering and strange movements so it looks like a rebuild or perhaps i could chop it in for another.

Pupp

12,971 posts

302 months

Wednesday 6th August 2008
quotequote all
I hear there's to be a lecture, where the designer of the rodent is going to tell us why it was not built as he intended...

sprintmp

379 posts

314 months

Wednesday 6th August 2008
quotequote all
jvr said:
A mouse for a computer is a pretty reliable piece of kit i would have thought but i've got one of those silver TVR Tuscan ones from Street Mouse.When i use the little wheel to scroll down it keeps wanting to go upwards.Do you think it might need a rebuild or is there a simple solution,any sugestions welcome.
Paul
Try turning it the right way up.biggrin

Mine workk fine - even with the headlighs on.

pbiggrin

Uncle Fester

3,114 posts

238 months

Wednesday 6th August 2008
quotequote all
Are you getting a pop up message?

"out of cheese error"

grahamw48

9,944 posts

268 months

Wednesday 6th August 2008
quotequote all
Maybe you should join the NMC.
They have a great website, and are very helpful to new owners. smile

Standards are high:

"The mouse must be long on body with long clean head, not too fine or pointed at the nose, the eyes should be large, bold and prominent. The ears large and tulip shaped, free from creases, carried erect with plenty of width between them. The body should be long and slim, a trifle arched over the loin and racy in appearance; the tail, which must be free from kinks should come well out of the back and be thick at the root or set-on, gradually tapering like a whip lash to a fine end, the length being about equal to that of the mouse's body. Unless the variety standard states otherwise, the coat should be short perfectly smooth, glossy and sleek to the hand. The mouse should be perfectly tractable and free from any vice and not subject to fits or other similar ailments. A mouse with absence of whiskers, blind in one or both eyes, carrying external parasites, having a tumour, sore or patches of fur missing, suffering from any obvious disease or deformity or kinked tail shall be disqualified."

Further info' here:

www.nationalmouseclub.co.uk


Edited by grahamw48 on Wednesday 6th August 21:34

jvr

Original Poster:

789 posts

277 months

Wednesday 6th August 2008
quotequote all
Thanks guys for all your help its been ah...useful.Its been a hard decision to make but i am going down to the pet shop first thing in morning to get a new one,working out the costs i might as well just replace.
Paulfrown